Lisp routine for extracting Z values as text

Discuss and upload any tools here for other members to use.
Post Reply
CPJP
I have made 10-20 posts
I have made 10-20 posts
Posts: 10
Joined: Wed Aug 19, 2015 4:24 pm
8
Full Name: Christopher Gorvett
Company Details: Philip Price Surveyors Ltd
Company Position Title: Land Surveyor
Country: United Kingdom
Linkedin Profile: No
Contact:

Lisp routine for extracting Z values as text

Post by CPJP »

Hello,
I dont suppose anyone can help me please.
I am drawing a building survey up using Cloudworx however the basic licience doesn;t allow me to extract cill and head heights for showing on the floor plan.

Could someone please recommend a decent lisp routine for extracting Z Values as text to place on my floor plans?

Many thanks in advance.

Chris
User avatar
Phill
V.I.P Member
V.I.P Member
Posts: 653
Joined: Wed Feb 06, 2008 7:19 am
16
Full Name: Phillip Nixon
Company Details: SKM
Company Position Title: Surveyor
Country: Australia
Location: Sydney
Has thanked: 7 times
Been thanked: 45 times

Re: Lisp routine for extracting Z values as text

Post by Phill »

Chris

The attached can do it one at a time. Load the lisp, type LPRL, click the point you want to label.

Cheers

Phill
You do not have the required permissions to view the files attached to this post.
CPJP
I have made 10-20 posts
I have made 10-20 posts
Posts: 10
Joined: Wed Aug 19, 2015 4:24 pm
8
Full Name: Christopher Gorvett
Company Details: Philip Price Surveyors Ltd
Company Position Title: Land Surveyor
Country: United Kingdom
Linkedin Profile: No
Contact:

Re: Lisp routine for extracting Z values as text

Post by CPJP »

Hi Phill, many thanks for this I will try it when I get to the office.

I found a couple last night but I couldn't get one to work and the other one wasn't quite right, I tried to edit it a bit but didn't succeed.

I have started to think to myself of how I am going to ensure I click the right point for the head and possibly any beam heights Etc. Cills and floors will be easy once I get the lisp, but I believe internal heads etc will take a bit much really caution. Also it might even be quicker to manually measure the heights I want to show on site?

Many thanks once again Phil
CPJP
I have made 10-20 posts
I have made 10-20 posts
Posts: 10
Joined: Wed Aug 19, 2015 4:24 pm
8
Full Name: Christopher Gorvett
Company Details: Philip Price Surveyors Ltd
Company Position Title: Land Surveyor
Country: United Kingdom
Linkedin Profile: No
Contact:

Re: Lisp routine for extracting Z values as text

Post by CPJP »

Thanks Phil,

your one works well thanks.

Here is another one I found which also works well and I have edited to give floor level as text including the z level

Many thanks

Chris
Post Reply

Return to “AutoLisp, DIESEL, Dynamo, VBA, Python & .Net Tools”