Goodmornig,
I have a little problem, when I use function "export element", sometimes it export the scan positions and the sections, sometimes only sections.
I do not understand why.
Thank you.
export element
-
- V.I.P Member
- Posts: 544
- Joined: Fri Feb 24, 2017 10:47 am
- 7
- Full Name: Martin Graner
- Company Details: PointCab GmbH
- Company Position Title: Research and Development
- Country: Germany
- Linkedin Profile: No
- Has thanked: 160 times
- Been thanked: 175 times
- Contact:
Re: export element
Hi Davide
It's the first time I'm hearing that.
Are there scan panoramas in your project, or was it imported unstructured?
After opening the dwg in your CAD please make sure, that you turned on the layers PointCabScans and PointCabText.
Martin
-
- I have made 10-20 posts
- Posts: 13
- Joined: Mon Dec 03, 2018 1:19 pm
- 5
- Full Name: Davide Pasina
- Company Details: studio tecnico Pasina associati
- Company Position Title: associato
- Country: Italia
- Skype Name: davide.playbike
- Linkedin Profile: Yes
- Been thanked: 2 times
Re: export element
Hi Martin,
is a project exported from Register 360.
But later I added an unstructured point cloud from metashape.
is a project exported from Register 360.
But later I added an unstructured point cloud from metashape.
-
- V.I.P Member
- Posts: 544
- Joined: Fri Feb 24, 2017 10:47 am
- 7
- Full Name: Martin Graner
- Company Details: PointCab GmbH
- Company Position Title: Research and Development
- Country: Germany
- Linkedin Profile: No
- Has thanked: 160 times
- Been thanked: 175 times
- Contact:
Re: export element
mh this might be an issue with the software, I'll check that and if I can reproduce it I will add a ticket to the bugtracker.
Thanks
-
- I have made 10-20 posts
- Posts: 13
- Joined: Mon Dec 03, 2018 1:19 pm
- 5
- Full Name: Davide Pasina
- Company Details: studio tecnico Pasina associati
- Company Position Title: associato
- Country: Italia
- Skype Name: davide.playbike
- Linkedin Profile: Yes
- Been thanked: 2 times