NEW Automated Data Filtering Tool in Connect

Discuss all GeoSlam related products here.
Post Reply
joshhillgeoslam
I have made 20-30 posts
I have made 20-30 posts
Posts: 20
Joined: Tue Aug 03, 2021 10:20 am
Full Name: Josh Hill
Company Details: GeoSLAM
Company Position Title: Product Marketing Specialist
Country: UK
Linkedin Profile: Yes
Has thanked: 1 time
Been thanked: 4 times

NEW Automated Data Filtering Tool in Connect

Post by joshhillgeoslam »

GeoSLAM Connect 2.1 includes new data filtering tools designed to remove outliers and unwanted points and reduce surface noise. These filters have been tested in a variety of environments, including mining.

In the example below, numerous people were walking in front of the ZEB Horizon throughout the capture process. Click on the link to see how effective these tools are at removing the unwanted points and noise from the point cloud.


youtu.be/rHMjjMa2EeM
https://youtu.be/rHMjjMa2EeM
aravanisandreas
I have made <0 posts
I have made <0 posts
Posts: 4
Joined: Tue Feb 08, 2022 3:37 pm
Full Name: Andreas Aravanis
Company Details: topodrone gr
Company Position Title: Land Survey Engineer
Country: Greece
Linkedin Profile: Yes

Re: NEW Automated Data Filtering Tool in Connect

Post by aravanisandreas »

So this is just noise. So now I have two questions.

Can I remove these outliers by intensity filter?
When comes out the 2.1 Connect?
badam
V.I.P Member
V.I.P Member
Posts: 459
Joined: Tue May 11, 2021 5:36 pm
1
Full Name: Adam Berta
Company Details: InnoScan 3D Hungary Kft
Company Position Title: unknown
Country: Hungary
Linkedin Profile: No
Has thanked: 16 times
Been thanked: 123 times
Contact:

Re: NEW Automated Data Filtering Tool in Connect

Post by badam »

aravanisandreas wrote: Fri Feb 11, 2022 2:40 pm So this is just noise. So now I have two questions.

Can I remove these outliers by intensity filter?
When comes out the 2.1 Connect?
I think you could try the noise remove in cloud compare, or try to use the SOR filter. I haven't tried it on a SLAM device but maybe it works better for them then with TLS devices. Where noises (Peoples, reflections) are not noise because they consist a lot of "good" points.
joshhillgeoslam
I have made 20-30 posts
I have made 20-30 posts
Posts: 20
Joined: Tue Aug 03, 2021 10:20 am
Full Name: Josh Hill
Company Details: GeoSLAM
Company Position Title: Product Marketing Specialist
Country: UK
Linkedin Profile: Yes
Has thanked: 1 time
Been thanked: 4 times

Re: NEW Automated Data Filtering Tool in Connect

Post by joshhillgeoslam »

aravanisandreas wrote: Fri Feb 11, 2022 2:40 pm So this is just noise. So now I have two questions.

Can I remove these outliers by intensity filter?
When comes out the 2.1 Connect?
This new filter will remove noise, outliers and any other unwanted points within the dataset. We are aiming to release Connect 2.1 along with the launch of our new ZEB Vision camera which should be within the next month, however we cannot confirm an exact release date at this time.
aravanisandreas
I have made <0 posts
I have made <0 posts
Posts: 4
Joined: Tue Feb 08, 2022 3:37 pm
Full Name: Andreas Aravanis
Company Details: topodrone gr
Company Position Title: Land Survey Engineer
Country: Greece
Linkedin Profile: Yes

Re: NEW Automated Data Filtering Tool in Connect

Post by aravanisandreas »

Many thanks all of you
aravanisandreas
I have made <0 posts
I have made <0 posts
Posts: 4
Joined: Tue Feb 08, 2022 3:37 pm
Full Name: Andreas Aravanis
Company Details: topodrone gr
Company Position Title: Land Survey Engineer
Country: Greece
Linkedin Profile: Yes

Re: NEW Automated Data Filtering Tool in Connect

Post by aravanisandreas »

Is there any update regarding the Connect 2.1 release?
joshhillgeoslam
I have made 20-30 posts
I have made 20-30 posts
Posts: 20
Joined: Tue Aug 03, 2021 10:20 am
Full Name: Josh Hill
Company Details: GeoSLAM
Company Position Title: Product Marketing Specialist
Country: UK
Linkedin Profile: Yes
Has thanked: 1 time
Been thanked: 4 times

Re: NEW Automated Data Filtering Tool in Connect

Post by joshhillgeoslam »

aravanisandreas wrote: Tue May 03, 2022 3:10 pm Is there any update regarding the Connect 2.1 release?
Connect 2.1 is due to be released very soon along with our ZEB Vision camera accessory. All our GeoSLAM Care customers will be notified with all of the relevant licencing information.
Post Reply

Return to “GeoSLAM”