How to Remove Realview Data
-
- I have made 10-20 posts
- Posts: 13
- Joined: Thu Aug 02, 2018 5:13 pm
- 5
- Full Name: Adam
- Company Details: Manufacturing
- Company Position Title: Engineer
- Country: United States
How to Remove Realview Data
I have a Recap project that has ~500 scans. I have deleted all the points outside of an area and saved as, while selecting the delete points option. My issue is all the realview data remains for every scan location. Due to this the project is still over 100GB in size. I am trying to reduce the project size as much as possible so that it is easier to share. Is there an easy way to delete all the realview data for locations that are outside of the remaining area? I have attached a screenshot to better illustrate.
You do not have the required permissions to view the files attached to this post.
-
- I have made 20-30 posts
- Posts: 29
- Joined: Fri Jul 08, 2016 11:17 am
- 7
- Full Name: Daniel Neagu
- Company Details: XYZ
- Company Position Title: Surveyor
- Country: United Kingdom
- Linkedin Profile: Yes
- Been thanked: 1 time
Re: How to Remove Realview Data
Hello,
how about you make a copy of rcp open it in registration mode remove the scans that you don't need and then save...
Hope it helps!
how about you make a copy of rcp open it in registration mode remove the scans that you don't need and then save...
Hope it helps!
- topogeo
- V.I.P Member
- Posts: 144
- Joined: Fri May 02, 2014 1:38 pm
- 9
- Full Name: piercarlo roasio
- Company Details: studio roasio
- Company Position Title: titolare
- Country: italy
- Linkedin Profile: No
- Has thanked: 24 times
- Been thanked: 25 times
Re: How to Remove Realview Data
Often problem ..
I solved by deleting the scans one by one, by clicking on the "x" of the scans list that you see on the right in the image of the scans.
But .. I do not know how to select a block ... I unfortunately, I select them one by one (and each singols snatch me apsettare many tens of seconds to be deleted).
Piercarlo
I solved by deleting the scans one by one, by clicking on the "x" of the scans list that you see on the right in the image of the scans.
But .. I do not know how to select a block ... I unfortunately, I select them one by one (and each singols snatch me apsettare many tens of seconds to be deleted).
Piercarlo
-
- I have made <0 posts
- Posts: 2
- Joined: Thu Feb 25, 2021 8:29 pm
- 3
- Full Name: Gonzalo Pampuro
- Company Details: Techint
- Company Position Title: BIM Manager
- Country: Argentina
- Linkedin Profile: Yes
Re: How to Remove Realview Data
Hi.
Same issue over here. Is there a better way to delete multiple scans?
And what about removing realview data from the project entirely? I only need the point cloud and not the realview data.
Same issue over here. Is there a better way to delete multiple scans?
And what about removing realview data from the project entirely? I only need the point cloud and not the realview data.
-
- I have made <0 posts
- Posts: 2
- Joined: Tue Dec 14, 2021 4:22 pm
- 2
- Full Name: Jason
- Company Details: Sterling Company
- Company Position Title: Professional Land Surveyor
- Country: USA
- Linkedin Profile: Yes
Re: How to Remove Realview Data
If you export a unified .rcp from the project, it'll be just the cloud data. Prior to that, you can go to the box on the right and turn off individual scans. You can delete and clip what's visible to your liking, then hit the top button on the left, slide over to the export button and hit it. It will just export the cloud in its current state. This does make it one cloud. You lose the individual scan functionality.
-
- I have made 40-50 posts
- Posts: 42
- Joined: Thu Feb 11, 2021 5:13 pm
- 3
- Full Name: Paul Bowers
- Company Details: Society of Piping Engineers and Designer
- Company Position Title: President
- Country: Canada
- Linkedin Profile: Yes
- Has thanked: 39 times
- Been thanked: 11 times
- Contact:
-
- V.I.P Member
- Posts: 544
- Joined: Fri Feb 24, 2017 10:47 am
- 7
- Full Name: Martin Graner
- Company Details: PointCab GmbH
- Company Position Title: Research and Development
- Country: Germany
- Linkedin Profile: No
- Has thanked: 160 times
- Been thanked: 175 times
- Contact:
Re: How to Remove Realview Data
What Jason said for deleten them all.
But for selecting certain scans:
Isn't it possible to move selected scans to a cluster and delete the cluster?
I mean if you select scans and drag them (in the list view)