Traditional Beer Hall | From Point Cloud to 3D Model
- hsnguyen
- I have made 20-30 posts
- Posts: 24
- Joined: Mon Jan 04, 2016 11:01 am
- 8
- Full Name: Huynh Si Nguyen
- Company Details: VMT SOLUTIONS LTD
- Company Position Title: CEO
- Country: Vietnam
- Linkedin Profile: Yes
- Has thanked: 4 times
- Been thanked: 4 times
- Contact:
Traditional Beer Hall | From Point Cloud to 3D Model
This traditional beer hall is now more than 100 years old and classified as cultural heritage.
From registered point cloud we have created a 3D ArchiCAD model and 2D plans, which can be used for the project planning of renovation.
This model look now so clean and accurate.
With DOUBLE CONTROL, we ensure the accuracy, as well as the quality of the model, and also mistakes are minimized.
100 Scans
1.135 m2
Drawing standard: preservation of monuments
Find out more about our Point cloud to BIM projects, please visit: https://vmts.ch/en/home-english/references/
From registered point cloud we have created a 3D ArchiCAD model and 2D plans, which can be used for the project planning of renovation.
This model look now so clean and accurate.
With DOUBLE CONTROL, we ensure the accuracy, as well as the quality of the model, and also mistakes are minimized.
100 Scans
1.135 m2
Drawing standard: preservation of monuments
Find out more about our Point cloud to BIM projects, please visit: https://vmts.ch/en/home-english/references/
Last edited by hsnguyen on Mon Dec 14, 2020 6:44 am, edited 1 time in total.
Rainer
VMT SOLUTIONS LTD
6th Floor, HOSE Building, Quang Trung Software City, District 12, HCMC, Vietnam
W: www.vmts.ch
Take a look at our sample: Point Cloud to BIM
VMT SOLUTIONS LTD
6th Floor, HOSE Building, Quang Trung Software City, District 12, HCMC, Vietnam
W: www.vmts.ch
Take a look at our sample: Point Cloud to BIM
-
- I have made 10-20 posts
- Posts: 15
- Joined: Mon Dec 09, 2019 10:36 am
- 4
- Full Name: Jakub Bies
- Company Details: Scanning
- Company Position Title: Technican
- Country: Poland
- Has thanked: 2 times
- Been thanked: 2 times
Re: Traditional Beer Hall | From Point Cloud to 3D Model
Hey!
Nice one! What is the modeling software that you are using from Point Cloud to 3D model?
Greetings!
Nice one! What is the modeling software that you are using from Point Cloud to 3D model?
Greetings!
-
- V.I.P Member
- Posts: 140
- Joined: Sun Apr 09, 2017 5:48 pm
- 6
- Full Name: Duy Nguyen
- Company Details: Baezeni VietNam
- Company Position Title: Baezeni VietNam
- Country: Vietnam
- Skype Name: duy_bz
- Linkedin Profile: No
- Has thanked: 8 times
- Been thanked: 8 times
- hsnguyen
- I have made 20-30 posts
- Posts: 24
- Joined: Mon Jan 04, 2016 11:01 am
- 8
- Full Name: Huynh Si Nguyen
- Company Details: VMT SOLUTIONS LTD
- Company Position Title: CEO
- Country: Vietnam
- Linkedin Profile: Yes
- Has thanked: 4 times
- Been thanked: 4 times
- Contact:
Re: Traditional Beer Hall | From Point Cloud to 3D Model
Yes, we' ve created this 3D Model in ArchiCAD
Rainer
VMT SOLUTIONS LTD
6th Floor, HOSE Building, Quang Trung Software City, District 12, HCMC, Vietnam
W: www.vmts.ch
Take a look at our sample: Point Cloud to BIM
VMT SOLUTIONS LTD
6th Floor, HOSE Building, Quang Trung Software City, District 12, HCMC, Vietnam
W: www.vmts.ch
Take a look at our sample: Point Cloud to BIM
- piotr.pioro
- I have made 30-40 posts
- Posts: 36
- Joined: Fri Apr 15, 2011 7:45 am
- 12
- Full Name: Piotr Pioro
- Company Details: P3D
- Company Position Title: owner
- Country: Poland
- Linkedin Profile: Yes
- Has thanked: 8 times
- Been thanked: 8 times
Re: Traditional Beer Hall | From Point Cloud to 3D Model
Hi,
model looks very nice. I am wondering why the dormer window has not been modeled? Also there are few more differences (doors/windows). The photo was taken after renovation but scan before?
regards
model looks very nice. I am wondering why the dormer window has not been modeled? Also there are few more differences (doors/windows). The photo was taken after renovation but scan before?
regards
You do not have the required permissions to view the files attached to this post.
- hsnguyen
- I have made 20-30 posts
- Posts: 24
- Joined: Mon Jan 04, 2016 11:01 am
- 8
- Full Name: Huynh Si Nguyen
- Company Details: VMT SOLUTIONS LTD
- Company Position Title: CEO
- Country: Vietnam
- Linkedin Profile: Yes
- Has thanked: 4 times
- Been thanked: 4 times
- Contact:
Re: Traditional Beer Hall | From Point Cloud to 3D Model
Hei piotr.pioro,piotr.pioro wrote: ↑Mon Nov 23, 2020 12:19 pm Hi,
model looks very nice. I am wondering why the dormer window has not been modeled? Also there are few more differences (doors/windows). The photo was taken after renovation but scan before?
regards
Thank you for your comment.
Yes, you' re right. This Photo was taken after renovation.Plz take a look at Screenshot below
Thanks & Regards
Rainer
VMT SOLUTIONS LTD
6th Floor, HOSE Building, Quang Trung Software City, District 12, HCMC, Vietnam
W: www.vmts.ch
Take a look at our sample: Point Cloud to BIM
VMT SOLUTIONS LTD
6th Floor, HOSE Building, Quang Trung Software City, District 12, HCMC, Vietnam
W: www.vmts.ch
Take a look at our sample: Point Cloud to BIM
-
- V.I.P Member
- Posts: 246
- Joined: Sat Jul 07, 2018 9:19 pm
- 5
- Full Name: Andrew
- Company Details: NDC Surveys
- Company Position Title: Surveyor
- Country: Uk
- Linkedin Profile: No
- Has thanked: 56 times
- Been thanked: 22 times
Re: Traditional Beer Hall | From Point Cloud to 3D Model
Great post - thanks for sharing. What is DOUBLE CONTROL? I'm intrigued
Regards, Andrew
-
- V.I.P Member
- Posts: 1037
- Joined: Tue Mar 29, 2011 7:39 pm
- 13
- Full Name: Scott Page
- Company Details: Scott Page Design- Architectural service
- Company Position Title: Owner
- Country: USA
- Linkedin Profile: No
- Location: Berkeley, CA USA
- Has thanked: 205 times
- Been thanked: 78 times
- Contact:
Re: Traditional Beer Hall | From Point Cloud to 3D Model
Archicad (a user since 2000) is not well suited for point clouds IMHO, though it's a powerful 2D/3D platform. Finding the perfect marriage for scan data and AEC software is elusive (I'm being kind)...a dog chasing its tail--'hope springs eternal'...
- hsnguyen
- I have made 20-30 posts
- Posts: 24
- Joined: Mon Jan 04, 2016 11:01 am
- 8
- Full Name: Huynh Si Nguyen
- Company Details: VMT SOLUTIONS LTD
- Company Position Title: CEO
- Country: Vietnam
- Linkedin Profile: Yes
- Has thanked: 4 times
- Been thanked: 4 times
- Contact:
Re: Traditional Beer Hall | From Point Cloud to 3D Model
Hi Andrew,
Normal workflow point cloud to BIM : 1.Laser scanning onsite > 2.Registration > 3.Point cloud to BIM processing
- Most of our projects, we received point cloud from our customers, it mean step 1 and 2 done by our customers, but most of case this result not very good and accuracy, we have team with experience we check this point cloud if we recognize errors, we will report to customer exact position with screenshots, this is first check.
- We can fix errors ourselves, after we finish point cloud to BIM process, we have a QC team check this file to ensure accuracy and quality, we mean second check.
Can you imagine? if point cloud contain some errors, and your provider "tracing" these errors to CAD, CAD models will be not accurate if we compare with reality, and who make this mistake?
We need a special workflow to control whole of steps and ensure quality!
Rainer
VMT SOLUTIONS LTD
6th Floor, HOSE Building, Quang Trung Software City, District 12, HCMC, Vietnam
W: www.vmts.ch
Take a look at our sample: Point Cloud to BIM
VMT SOLUTIONS LTD
6th Floor, HOSE Building, Quang Trung Software City, District 12, HCMC, Vietnam
W: www.vmts.ch
Take a look at our sample: Point Cloud to BIM