RTC360 Check and adjust
-
- I have made 10-20 posts
- Posts: 18
- Joined: Tue Jan 25, 2011 9:05 pm
- 13
- Full Name: Stephen Hudson
- Company Details: Malcolm Hollis
- Company Position Title: Senior Surveyor
- Country: England
- Linkedin Profile: Yes
RTC360 Check and adjust
I recently updated the firmware on our RTC360 and wanted to try out the new "Check & Adjust" feature.
I tried to run it outdoors with what I thought was some interesting geometry around me, but kept being told it couldn't complete.
Has anyone successfully run this tool, and if so what surrounding features do I need to have around me. I think perhaps the lack of overhead detail may have been an issue, but that limits me to only running it indoors where the max distance of any detail from the scanner will be greatly reduced.
The whole process takes around 6 minutes so I can't afford to just keep trying and trying until I get it to work!
Thanks,
I tried to run it outdoors with what I thought was some interesting geometry around me, but kept being told it couldn't complete.
Has anyone successfully run this tool, and if so what surrounding features do I need to have around me. I think perhaps the lack of overhead detail may have been an issue, but that limits me to only running it indoors where the max distance of any detail from the scanner will be greatly reduced.
The whole process takes around 6 minutes so I can't afford to just keep trying and trying until I get it to work!
Thanks,
- LeicaUK_RC
- V.I.P Member
- Posts: 777
- Joined: Sun Jul 17, 2011 9:30 am
- 12
- Full Name: Phil Marsh
- Company Details: Leica Geosystems part of Hexagon
- Company Position Title: Reality Capture Director UK
- Country: UK
- Skype Name: Phil.H.Marsh
- Linkedin Profile: Yes
- Location: Barnsley, UK
- Been thanked: 52 times
- Contact:
Re: RTC360 Check and adjust
Hi Stephen,
I've emailed you a few documents which will help to give a deeper understanding of the check and adjust routine on the RTC-series scanners.
I hope this helps?
I've emailed you a few documents which will help to give a deeper understanding of the check and adjust routine on the RTC-series scanners.
I hope this helps?
-
- I have made 10-20 posts
- Posts: 18
- Joined: Tue Jan 25, 2011 9:05 pm
- 13
- Full Name: Stephen Hudson
- Company Details: Malcolm Hollis
- Company Position Title: Senior Surveyor
- Country: England
- Linkedin Profile: Yes
-
- I have made <0 posts
- Posts: 2
- Joined: Tue Jan 15, 2019 6:20 pm
- 5
- Full Name: Michal Gula
- Company Details: SANWU
- Company Position Title: CEO
- Country: Slovakia
Re: RTC360 Check and adjust
Hi, could you be so kind and send those documents to me as well? Thanks in forward. [quote=LeicaUK_RTC post_id=88657 time=1600248142 user_id=12246]
Hi Stephen,
I've emailed you a few documents which will help to give a deeper understanding of the check and adjust routine on the RTC-series scanners.
I hope this helps?
-
- I have made 60-70 posts
- Posts: 62
- Joined: Mon May 25, 2020 12:56 pm
- 3
- Full Name: Ant
- Company Details: Mck
- Company Position Title: BIM engineer
- Country: Cro
- Has thanked: 7 times
Re: RTC360 Check and adjust
Hello. Also recently updated our rtc 360 and would like to see those documents if you don't mind sharing on email?LeicaUK_RTC wrote: ↑Wed Sep 16, 2020 10:22 am Hi Stephen,
I've emailed you a few documents which will help to give a deeper understanding of the check and adjust routine on the RTC-series scanners.
I hope this helps?
Thanks
-
- V.I.P Member
- Posts: 330
- Joined: Tue Nov 20, 2007 3:51 am
- 16
- Full Name: Chris Widmer
- Company Details: KCI
- Company Position Title: 3D Scanning Manager
- Country: USA
- Linkedin Profile: Yes
- Location: Atlanta, Georgia
- Has thanked: 3 times
- Been thanked: 8 times
Re: RTC360 Check and adjust
I too tried the check and adjust in multiple different locations and received the same message.
-
- I have made 10-20 posts
- Posts: 12
- Joined: Tue Feb 02, 2016 10:19 am
- 8
- Full Name: Matthew Miles
- Company Details: LGA
- Company Position Title: Surveyor
- Country: UK
- Linkedin Profile: Yes
- Has thanked: 1 time
- Been thanked: 1 time
Re: RTC360 Check and adjust
I could do with a copy of these as well if possible Phil.LeicaUK_RTC wrote: ↑Wed Sep 16, 2020 10:22 am Hi Stephen,
I've emailed you a few documents which will help to give a deeper understanding of the check and adjust routine on the RTC-series scanners.
I hope this helps?
Thanks
-
- I have made <0 posts
- Posts: 3
- Joined: Tue Jun 23, 2009 4:01 pm
- 14
- Full Name: Justin Hill
- Company Details: Lloyd and Hill Inc
- Company Position Title: Director
- Linkedin Profile: Yes
- Location: Cape Town, South Africa
- Contact:
-
- I have made <0 posts
- Posts: 1
- Joined: Fri Dec 11, 2020 10:09 am
- 3
- Full Name: Andrew Chambers
- Company Details: Laser scanning
- Company Position Title: Digital Engineer
- Country: Ireland
- Linkedin Profile: No
Re: RTC360 Check and adjust
Hi Phil could you forward on a copy of these documents to me also. Much appreciated.LeicaUK_RC wrote: ↑Wed Sep 16, 2020 10:22 am Hi Stephen,
I've emailed you a few documents which will help to give a deeper understanding of the check and adjust routine on the RTC-series scanners.
I hope this helps?
-
- I have made <0 posts
- Posts: 6
- Joined: Mon Mar 18, 2019 12:13 am
- 5
- Full Name: Mike Larson
- Company Details: ___________
- Company Position Title: Engineer
- Country: USA
- Linkedin Profile: Yes