RTC360 Check and adjust

Faro FOCUS S350, S150, S70, M70, X30, X130, X130HDR, X330, X330HDR. Leica RTC360, C10, P15, P20, P30, P40, P50, BLK360, HDS6*00, HDS7000,HDS8800, HDS8400. Riegl VZ6000, VZ4000, VZ2000, VZ1000 & VZ400i. Topcon GTL-1000, GLS2200, GLS1500. Trimble X7, X9, X12, SX12, SX10, TX8, TX6, S7 & S9. Z+F IMAGER 5016, 5010X, 5010C, 5006H, 5006EX & PROFILER 9012
Post Reply
sdhudson
I have made 10-20 posts
I have made 10-20 posts
Posts: 18
Joined: Tue Jan 25, 2011 9:05 pm
13
Full Name: Stephen Hudson
Company Details: Malcolm Hollis
Company Position Title: Senior Surveyor
Country: England
Linkedin Profile: Yes

RTC360 Check and adjust

Post by sdhudson »

I recently updated the firmware on our RTC360 and wanted to try out the new "Check & Adjust" feature.

I tried to run it outdoors with what I thought was some interesting geometry around me, but kept being told it couldn't complete.

Has anyone successfully run this tool, and if so what surrounding features do I need to have around me. I think perhaps the lack of overhead detail may have been an issue, but that limits me to only running it indoors where the max distance of any detail from the scanner will be greatly reduced.

The whole process takes around 6 minutes so I can't afford to just keep trying and trying until I get it to work!

Thanks,
User avatar
LeicaUK_RC
V.I.P Member
V.I.P Member
Posts: 777
Joined: Sun Jul 17, 2011 9:30 am
12
Full Name: Phil Marsh
Company Details: Leica Geosystems part of Hexagon
Company Position Title: Reality Capture Director UK
Country: UK
Skype Name: Phil.H.Marsh
Linkedin Profile: Yes
Location: Barnsley, UK
Been thanked: 52 times
Contact:

Re: RTC360 Check and adjust

Post by LeicaUK_RC »

Hi Stephen,

I've emailed you a few documents which will help to give a deeper understanding of the check and adjust routine on the RTC-series scanners.

I hope this helps?
Leica Geosystems
M: 07540 201383
E: [email protected]
W: www.leica-geosystems.com
sdhudson
I have made 10-20 posts
I have made 10-20 posts
Posts: 18
Joined: Tue Jan 25, 2011 9:05 pm
13
Full Name: Stephen Hudson
Company Details: Malcolm Hollis
Company Position Title: Senior Surveyor
Country: England
Linkedin Profile: Yes

Re: RTC360 Check and adjust

Post by sdhudson »

Thanks Phil.

Very useful, will give them a try!

Regards,
miguel
I have made <0 posts
I have made <0 posts
Posts: 2
Joined: Tue Jan 15, 2019 6:20 pm
5
Full Name: Michal Gula
Company Details: SANWU
Company Position Title: CEO
Country: Slovakia

Re: RTC360 Check and adjust

Post by miguel »

8142 user_id=12246]
Hi Stephen,

I've emailed you a few documents which will help to give a deeper understanding of the check and adjust routine on the RTC-series scanners.

I hope this helps?
Hi, could you be so kind and send those documents to me as well? Thanks in forward. [quote=LeicaUK_RTC post_id=88657 time=160024
virtuoso
I have made 60-70 posts
I have made 60-70 posts
Posts: 62
Joined: Mon May 25, 2020 12:56 pm
3
Full Name: Ant
Company Details: Mck
Company Position Title: BIM engineer
Country: Cro
Has thanked: 7 times

Re: RTC360 Check and adjust

Post by virtuoso »

LeicaUK_RTC wrote: Wed Sep 16, 2020 10:22 am Hi Stephen,

I've emailed you a few documents which will help to give a deeper understanding of the check and adjust routine on the RTC-series scanners.

I hope this helps?
Hello. Also recently updated our rtc 360 and would like to see those documents if you don't mind sharing on email?

Thanks
cpw006
V.I.P Member
V.I.P Member
Posts: 330
Joined: Tue Nov 20, 2007 3:51 am
16
Full Name: Chris Widmer
Company Details: KCI
Company Position Title: 3D Scanning Manager
Country: USA
Linkedin Profile: Yes
Location: Atlanta, Georgia
Has thanked: 3 times
Been thanked: 8 times

Re: RTC360 Check and adjust

Post by cpw006 »

I too tried the check and adjust in multiple different locations and received the same message.
Matt77M
I have made 10-20 posts
I have made 10-20 posts
Posts: 12
Joined: Tue Feb 02, 2016 10:19 am
8
Full Name: Matthew Miles
Company Details: LGA
Company Position Title: Surveyor
Country: UK
Linkedin Profile: Yes
Has thanked: 1 time
Been thanked: 1 time

Re: RTC360 Check and adjust

Post by Matt77M »

LeicaUK_RTC wrote: Wed Sep 16, 2020 10:22 am Hi Stephen,

I've emailed you a few documents which will help to give a deeper understanding of the check and adjust routine on the RTC-series scanners.

I hope this helps?
I could do with a copy of these as well if possible Phil.

Thanks
Justin Hill
I have made <0 posts
I have made <0 posts
Posts: 3
Joined: Tue Jun 23, 2009 4:01 pm
14
Full Name: Justin Hill
Company Details: Lloyd and Hill Inc
Company Position Title: Director
Linkedin Profile: Yes
Location: Cape Town, South Africa
Contact:

Re: RTC360 Check and adjust

Post by Justin Hill »

Yes, me too please. Unless its just the Check and Adjust User Manual.
Andrew Chambers
I have made <0 posts
I have made <0 posts
Posts: 1
Joined: Fri Dec 11, 2020 10:09 am
3
Full Name: Andrew Chambers
Company Details: Laser scanning
Company Position Title: Digital Engineer
Country: Ireland
Linkedin Profile: No

Re: RTC360 Check and adjust

Post by Andrew Chambers »

LeicaUK_RC wrote: Wed Sep 16, 2020 10:22 am Hi Stephen,

I've emailed you a few documents which will help to give a deeper understanding of the check and adjust routine on the RTC-series scanners.

I hope this helps?
Hi Phil could you forward on a copy of these documents to me also. Much appreciated.
mlarson
I have made <0 posts
I have made <0 posts
Posts: 6
Joined: Mon Mar 18, 2019 12:13 am
5
Full Name: Mike Larson
Company Details: ___________
Company Position Title: Engineer
Country: USA
Linkedin Profile: Yes

Re: RTC360 Check and adjust

Post by mlarson »

Could I also get a copy of these documents? - thanks!
Post Reply

Return to “Terrestrial Laser Scanners [TLS]”