Hey Guys,
i modeled a room with planes in Realworks and now i want o trimm those planes to get some kind of watertight mesh. Any Ideas?
I have AutoCad Map but i couldnt figure it out yet . Picture is below
Thanks
Julian
Software for trimming Planes
-
- I have made 100> posts
- Posts: 102
- Joined: Tue Feb 28, 2017 7:49 am
- 7
- Full Name: Julian Weber
- Company Details: Stadt Reutlingen
- Company Position Title: director of engineering surveying
- Country: Germany
- Has thanked: 1 time
- Been thanked: 5 times
Software for trimming Planes
You do not have the required permissions to view the files attached to this post.
-
- I have made 10-20 posts
- Posts: 14
- Joined: Mon Aug 17, 2020 11:07 pm
- 3
- Full Name: Denys Gorkovchuk
- Company Details: Individual Enterpreneur
- Company Position Title: Programmer
- Country: Ukraine
- Linkedin Profile: No
- Has thanked: 1 time
- Been thanked: 4 times
- tchaper
- I have made 50-60 posts
- Posts: 52
- Joined: Mon Sep 02, 2013 8:47 am
- 10
- Full Name: Thomas Chaperon
- Company Details: Trimble
- Company Position Title: Senior software engineer
- Country: France
- Linkedin Profile: Yes
Re: Software for trimming Planes
Hi Julian,
If you want to define the boundaries of each plane as defined by the other planes, you can select a plane and start the Model>Edit>Intersect tool and pick the other corresponding planes.
I hope this helps.
Thanks,
Thomas
If you want to define the boundaries of each plane as defined by the other planes, you can select a plane and start the Model>Edit>Intersect tool and pick the other corresponding planes.
I hope this helps.
Thanks,
Thomas