Import Cyclone file to LFM

Discuss AVEVA Suite software here.
Post Reply
Scan-Ninja
V.I.P Member
V.I.P Member
Posts: 245
Joined: Sat Apr 26, 2014 2:04 pm
9
Full Name: Fabien
Company Details: Amec Foster Wheeler
Company Position Title: Geomatics Project Manager
Country: USA
Linkedin Profile: Yes

Import Cyclone file to LFM

Post by Scan-Ninja »

Any material or can someone help on importing scan data to LFM, from Cyclone. Thanks.
User avatar
Phill
V.I.P Member
V.I.P Member
Posts: 653
Joined: Wed Feb 06, 2008 7:19 am
16
Full Name: Phillip Nixon
Company Details: SKM
Company Position Title: Surveyor
Country: Australia
Location: Sydney
Has thanked: 7 times
Been thanked: 45 times

Re: Import Cyclone file to LFM

Post by Phill »

Fabien

I nutted it out last June, but haven't done it since and I'm no expert by any stretch of the imagination. Here is the steps I sent to the guys who was trying to do it.

1. Open LFM
2. Use the second red grey wheel in the top left to switch to Gateway mode
3. Either make a new lfm for save the untitled one it has made
4. In the box on left right click on the redgrey wheel that’s named the same as your project and import to this project (recommend an e57)
lfm1.jpg
5. Wait for that to import
6. Right click on the New group and select Generation setting
7. Setup all the boxes with required attributes (particularly the first 3 locaitons)
8. Press the dataset button.
lfm2.png
When using the ptxs I seem to have to pick each scan and force it to registered. Didn’t seem to need to with the e57.

Hope this is of some assistance.

Cheers

Phill
You do not have the required permissions to view the files attached to this post.
Post Reply

Return to “AVEVA Suite”