Hello to everybody...
i'm processing a caves project and have some problem with point cloud colorization.
I used external camera with Nodal Ninja and FishEye as lens.
*30 scans only 10 automaticcaly colorized from Laser Control;
*Then i startedd with manual colorization...(means to pick same points on my 360°Panorama and my PointCloud;
*Unfortunately for some scans, it doens't work manual colorization;
*I picked also 14 points...but software after processing continue to give me error and write...not enough correspond points;
Did someone had experience or advice would be helpful for me???
thank you
ZFLC_Point_Cloud_Colorization
- studioMT
- I have made 10-20 posts
- Posts: 19
- Joined: Sat Feb 28, 2015 4:49 pm
- 9
- Full Name: Matteo Tartaglini
- Company Details: Studio Tecnico MT
- Company Position Title: Senior Surveyor
- Country: ITALY
- Skype Name: geom.tartaglini
- Linkedin Profile: Yes
- Contact:
-
- I have made 70-80 posts
- Posts: 70
- Joined: Wed Sep 05, 2012 4:04 pm
- 11
- Full Name: Christoph Held
- Company Details: Zoller+Froehlich GmbH
- Company Position Title: Z+F Team
- Country: Germany
- Been thanked: 7 times
Re: ZFLC_Point_Cloud_Colorization
Hi Matteo,
it sound a little like the points were not picked ideally. However, please contact [email protected] or directly myself (c.held@), so we can have a closer look what the issue is and solve it.
Best regards,
Chris
it sound a little like the points were not picked ideally. However, please contact [email protected] or directly myself (c.held@), so we can have a closer look what the issue is and solve it.
Best regards,
Chris
- studioMT
- I have made 10-20 posts
- Posts: 19
- Joined: Sat Feb 28, 2015 4:49 pm
- 9
- Full Name: Matteo Tartaglini
- Company Details: Studio Tecnico MT
- Company Position Title: Senior Surveyor
- Country: ITALY
- Skype Name: geom.tartaglini
- Linkedin Profile: Yes
- Contact: