Hi all,
I am looking for a way to export individual targets from scanworlds in a Cyclone 9.x database.
Does anyone have experience with this? And do you want to share it?
This is the situation:
I have imported a scan project into Cyclone. And as such I have a set of unregistered scanworlds.
In each scanworld I have 4-6 targets (TargetID) that do have coordinates in the local coordinate system of that particular scanworld.
Now I would like to be able to export the targets from each scanworld, such that I get a list of targets per scanworld and formatted as "<TargetID>,<X>,<Y>,<Z>". Does anyone have ideas on how to this?
Thanks in advance for your reactions.
PeterM.
P.S.
1) I can do it manually, but that is not what I want because is is very cumbersome when there are more than three scanworlds.
2) In Cyclone 7.4 it was possible to retrieve target information from text-files that were generated and stored with each scanworld, but for some reason it was decided not to provide this information anymore.
Howto batch-export tagets from scanworlds in Cyclone 9.x
-
- I have made <0 posts
- Posts: 1
- Joined: Thu Apr 07, 2016 8:43 am
- 7
- Full Name: P. Mestrum
- Company Details: Van Steenis Geodesie
- Company Position Title: Developer
- Country: Netherlands
- richard_m
- V.I.P Member
- Posts: 280
- Joined: Thu Apr 03, 2014 9:14 pm
- 9
- Full Name: Richard Merrin
- Company Details: Fugro
- Company Position Title: Data Processor _ Project Engineer
- Country: Netherlands
- Linkedin Profile: Yes
- Been thanked: 1 time
- Contact:
Re: Howto batch-export tagets from scanworlds in Cyclone 9.x
Hi,
- Open either the individual modelspace for the scan or the combined modelspace for all scans. Top view is good.
- Goto Selection (pull-down)
- Set Selectable and make invisible everything except "vertexes"
You should now have an almost blank top-view showing only your targets.
- Goto Selection (pull-down)
- Select All ( or fence and select fenced)
- Goto File (pull-down)
- Export
- Change export format to .txt
- After entering filename/location you will be prompted to setup your custom format i.e.TargetID,X,Y,Z)
Alternatively you might be able to open the Registration and select Registration (pull-down) and then Show Diagnostics, with some filtering and reformatting of this textfile you might get the tgt co-ords I can't remember off the top of my head..
Veel succes
Richard
- Open either the individual modelspace for the scan or the combined modelspace for all scans. Top view is good.
- Goto Selection (pull-down)
- Set Selectable and make invisible everything except "vertexes"
You should now have an almost blank top-view showing only your targets.
- Goto Selection (pull-down)
- Select All ( or fence and select fenced)
- Goto File (pull-down)
- Export
- Change export format to .txt
- After entering filename/location you will be prompted to setup your custom format i.e.TargetID,X,Y,Z)
Alternatively you might be able to open the Registration and select Registration (pull-down) and then Show Diagnostics, with some filtering and reformatting of this textfile you might get the tgt co-ords I can't remember off the top of my head..
Veel succes
Richard
- DelioPontes
- V.I.P Member
- Posts: 213
- Joined: Fri Dec 14, 2007 1:45 pm
- 16
- Full Name: Delio Pontes
- Company Details: Fugro
- Company Position Title: Engineering Surveyor
- Country: United Kingdom
- Linkedin Profile: Yes
- Location: United Kingdom
- Contact:
Re: Howto batch-export tagets from scanworlds in Cyclone 9.x
Registration diagnostics will not give you vertex coordinates, only vector errors and scan positions.
You need to use Richard solution 1.
Or on cyclone model space, export Leica 1200 format and open de dbx in Leica Geoffice to export csv format.
You need to use Richard solution 1.
Or on cyclone model space, export Leica 1200 format and open de dbx in Leica Geoffice to export csv format.
-
- I have made <0 posts
- Posts: 6
- Joined: Tue May 14, 2019 6:56 pm
- 4
- Full Name: Tim Bennett
- Company Details: Green Seal Environmental Inc
- Company Position Title: Director of Land Surveying
- Country: United States
- Linkedin Profile: Yes
- Has thanked: 1 time
- Been thanked: 2 times
Re: Howto batch-export tagets from scanworlds in Cyclone 9.x
Any idea how to export target coordinates in REGISTER 360?
- gsisman
- V.I.P Member
- Posts: 898
- Joined: Fri Oct 07, 2016 1:51 pm
- 7
- Full Name: Steve Long
- Company Details: Montgomery County DOT _ MD
- Company Position Title: Land Survey Supervisor
- Country: United States
- Skype Name: gsisman1
- Linkedin Profile: Yes
- Has thanked: 767 times
- Been thanked: 148 times
Re: Howto batch-export tagets from scanworlds in Cyclone 9.x
That's a nice idea for a future CCP add-in. They're working on the assumption you are going the other direction control INTO the scan-cloud.TimBennett wrote: ↑Tue Oct 01, 2019 1:54 pm Any idea how to export target coordinates in REGISTER 360?