Cyclone 9.4
-
- I have made 10-20 posts
- Posts: 15
- Joined: Mon Jan 09, 2017 1:26 pm
- 7
- Full Name: Stephen Hollinger
- Company Details: HGA
- Company Position Title: 3d tech manager
- Country: USA
- Linkedin Profile: Yes
- Has thanked: 1 time
Cyclone 9.4
Installed latest update on machine and lic server.
It will not pull a lic, and I can only use viewer mode.
Any ideas.
I have un-installed and re-installed.
Seem the clm locally is not upgraded.
It will not pull a lic, and I can only use viewer mode.
Any ideas.
I have un-installed and re-installed.
Seem the clm locally is not upgraded.
-
- I have made <0 posts
- Posts: 8
- Joined: Thu May 30, 2019 2:04 am
- 4
- Full Name: Miguel Guimarães
- Company Details: Miguel J Guimaraes - Serv Top
- Company Position Title: Owner
- Country: Portugal
- Linkedin Profile: No
- Has thanked: 2 times
Re: Cyclone 9.4
Report directly to Leica.
I had some problems installing the newest version of Cloudworx and Register360 and Leica sended a new link for the instalation to use rather then the link in Myworld.
I had some problems installing the newest version of Cloudworx and Register360 and Leica sended a new link for the instalation to use rather then the link in Myworld.
-
- I have made 50-60 posts
- Posts: 53
- Joined: Thu Feb 18, 2010 5:01 pm
- 14
- Full Name: Jon Adams
- Company Details: Forensic and Architectural Consulting
- Company Position Title: Director of 3D Reality Capture
- Country: USA
- Linkedin Profile: Yes
- Location: PA
- gsisman
- V.I.P Member
- Posts: 898
- Joined: Fri Oct 07, 2016 1:51 pm
- 7
- Full Name: Steve Long
- Company Details: Montgomery County DOT _ MD
- Company Position Title: Land Survey Supervisor
- Country: United States
- Skype Name: gsisman1
- Linkedin Profile: Yes
- Has thanked: 767 times
- Been thanked: 149 times
Re: Cyclone 9.4
Install CLM 1.8, Check to make sure your licenses are shown. I used a non-MYWORLD link also. From NA division Leica. Everything is functioningshollinger70 wrote: ↑Sun Jun 02, 2019 12:45 pm Installed latest update on machine and lic server.
It will not pull a lic, and I can only use viewer mode.
Any ideas.
I have un-installed and re-installed.
Seem the clm locally is not upgraded.
- pburrows145
- V.I.P Member
- Posts: 2152
- Joined: Wed Sep 12, 2007 9:16 am
- 16
- Full Name: Paul Burrows
- Company Details: Leica Geosystems Europe
- Company Position Title: Scanning Solutions Manager - Europe
- Country: UK
- Linkedin Profile: Yes
- Location: UK
- Has thanked: 109 times
- Been thanked: 123 times
- stevenramsey
- Global Moderator
- Posts: 1937
- Joined: Sun Aug 12, 2007 9:22 pm
- 16
- Full Name: Steven Ramsey
- Company Details: 4DMax
- Company Position Title: Technical Specialist Scanning
- Country: UK
- Skype Name: steven.ramsey
- Linkedin Profile: Yes
- Location: London
- Has thanked: 30 times
- Been thanked: 72 times
- Contact:
Re: Cyclone 9.4
go to the CLM and verify license. it will update your license for the new features as long as your under CCP
-
- I have made 30-40 posts
- Posts: 38
- Joined: Mon Dec 16, 2013 11:22 am
- 10
- Full Name: Robin Ault
- Company Details: Downland Partnership
- Company Position Title: Director
- Country: uk
- Linkedin Profile: No
- Has thanked: 2 times
- Been thanked: 2 times
Re: Cyclone 9.4
Latest windows update can effect licence server. Had to contact Leica Support who fixed it online for me.
-
- V.I.P Member
- Posts: 643
- Joined: Mon Aug 11, 2008 4:13 pm
- 15
- Full Name: James Rye
- Company Details: Merrett Survey Partnership
- Company Position Title: Spatial Analyst
- Has thanked: 28 times
- Been thanked: 69 times
Re: Cyclone 9.4
I did not do a clean install, but will try that when time permits.pburrows145 wrote: ↑Mon Jun 03, 2019 10:08 amNot one so far, not even in beta testing.... did you clean install?
- pburrows145
- V.I.P Member
- Posts: 2152
- Joined: Wed Sep 12, 2007 9:16 am
- 16
- Full Name: Paul Burrows
- Company Details: Leica Geosystems Europe
- Company Position Title: Scanning Solutions Manager - Europe
- Country: UK
- Linkedin Profile: Yes
- Location: UK
- Has thanked: 109 times
- Been thanked: 123 times