I am using Scene 6.2.4.30. After automatic registration, and I click "no" when asked if scans were registered correctly (intending to register manually), I get this message:
"The file could not be saved to it's current location. Use the command "save as" to save it to a different location.". I have no idea why it is asking this. I click "ok" on this screen, then discover that several of my scans in clusters can not load (usually with an error 16 or 17). The scans exist in my raw scan folder. I have plenty of memory on my hard drive. I reloaded the scans on several projects and it keeps happening.
Attached is a photo of the screen I get.
Any ideas of what I am doing wrong or fixes?
File could not save to current location . . .
-
- I have made <0 posts
- Posts: 1
- Joined: Thu Jan 21, 2016 4:12 pm
- 8
- Full Name: Darren McShea
- Company Details: Vancouver Police Department
- Company Position Title: Detective
- Country: USA
- Linkedin Profile: No
File could not save to current location . . .
You do not have the required permissions to view the files attached to this post.
- LPaulCook
- V.I.P Member
- Posts: 485
- Joined: Sat Jul 18, 2015 9:42 pm
- 8
- Full Name: L Paul Cook
- Company Details: Land surveyor doing LiDAR
- Company Position Title: President
- Country: United States
- Linkedin Profile: Yes
- Location: Santa Barbara CA
- Has thanked: 47 times
- Been thanked: 44 times
- Contact:
Re: File could not save to current location . . .
I have see this a few times with the new version and the previous version of SCENE. having no other option I clicked through it and all still went fine... Bug I guess....
L. Paul Cook, PLS
www.LPC3D.com
www.LPC3D.com
-
- I have made 10-20 posts
- Posts: 19
- Joined: Tue Apr 26, 2016 8:48 am
- 7
- Full Name: ALAN NICHOLSON
- Company Details: ANSurveys Limited
- Company Position Title: DIRECTOR
- Country: United Kingdom
- Linkedin Profile: Yes
Re: File could not save to current location . . .
I have had the same problem and error loading scans afterwards. Doesn't happen every time. BUG!
-
- I have made <0 posts
- Posts: 8
- Joined: Wed Jun 29, 2016 5:47 pm
- 7
- Full Name: John Gordon
- Company Details: Rouse-Sirine Associates Ltd
- Company Position Title: Cad Manager
- Country: USA
- Linkedin Profile: No
Re: File could not save to current location . . .
I ran into this problem when trying to register scans and I hit the verify button before the scans completely loaded (became crisp and clear in the correspondence view). I found that when I hit the button as it went green and the scans didn't finish loading, the scan file that was being verified would then have an error and I would have to reload the scan file and register it over again.