360° lighting for 3D laser scanner

Discuss Laser Scanning Europe Products | Services here.
Post Reply
User avatar
Jason Warren
Administrator
Administrator
Posts: 4234
Joined: Thu Aug 16, 2007 9:21 am
16
Full Name: Jason Warren
Company Details: Laser Scanning Forum Ltd
Company Position Title: Co-Founder
Country: UK
Skype Name: jason_warren
Linkedin Profile: No
Location: Retford, UK
Has thanked: 457 times
Been thanked: 251 times
Contact:

360° lighting for 3D laser scanner

Post by Jason Warren »


youtu.be/Zcr-IkFMckY

looks a neat solution... ;)
Jason Warren
Co_Founder

Dedicated to 3D Laser Scanning
LaserScanningForum
ScottErnst
I have made 90-100 posts
I have made 90-100 posts
Posts: 94
Joined: Tue Jan 24, 2017 2:31 am
7
Full Name: Scott Ernst
Company Details: Southwest Scanning
Company Position Title: owner
Country: United States
Linkedin Profile: No
Has thanked: 3 times
Been thanked: 13 times

Re: 360° lighting for 3D laser scanner

Post by ScottErnst »

I use a couple of Petzl Zipka headlamps. The Zipka has a retractable head band that cinches around the scanner. You're not going to light up a parking garage with it, but for small crawl spaces it does a pretty good job.
You do not have the required permissions to view the files attached to this post.
User avatar
Scott.Warren
V.I.P Member
V.I.P Member
Posts: 368
Joined: Tue Jan 30, 2018 3:14 pm
6
Full Name: Scott Warren
Company Details: WSP Canada
Company Position Title: Project Manager - Geomatics Engineer
Country: Canada
Linkedin Profile: Yes
Location: Dartmouth, Nova Scotia, Canada
Has thanked: 47 times
Been thanked: 111 times
Contact:

Re: 360° lighting for 3D laser scanner

Post by Scott.Warren »

https://bushman-panoramic.com/products/halo-360-light

I like this little guy, has a threading on top for the BLK360 adapter.
User avatar
landmeterbeuckx
V.I.P Member
V.I.P Member
Posts: 1633
Joined: Tue May 01, 2012 5:19 pm
12
Full Name: Lieven Beuckx
Company Details: Studiebureau Beuckx
Company Position Title: Owner
Country: Belgium
Linkedin Profile: Yes
Has thanked: 188 times
Been thanked: 566 times

Re: 360° lighting for 3D laser scanner

Post by landmeterbeuckx »

Scott.Warren wrote: Wed Mar 20, 2024 5:14 pm https://bushman-panoramic.com/products/halo-360-light

I like this little guy, has a threading on top for the BLK360 adapter.
Hi Scott,
Seen this before. Does it perform well enough?
LSBbvba
Surveying services - 3D Laserscanning
Tel : +32477753126
www.lsbbvba.be
[email protected]
sim.herrod
V.I.P Member
V.I.P Member
Posts: 355
Joined: Thu Jan 14, 2016 12:26 pm
8
Full Name: Simeon Herrod
Company Details: Terra Measurement Limited
Company Position Title: 3D Data Manager
Country: UK
Linkedin Profile: No
Has thanked: 79 times
Been thanked: 111 times

Re: 360° lighting for 3D laser scanner

Post by sim.herrod »

landmeterbeuckx wrote: Thu Mar 21, 2024 7:04 am
Scott.Warren wrote: Wed Mar 20, 2024 5:14 pm https://bushman-panoramic.com/products/halo-360-light

I like this little guy, has a threading on top for the BLK360 adapter.
Hi Scott,
Seen this before. Does it perform well enough?
We use one of these under our insta360X3 or Theta Z1and it's very good, but we built our own lighting rig with 6 led panels to go under our Faro as we didn't think the Halo was bright enough for scanning.

Next job is to use the same LED panels and 3D print some brackets for our VLX.
User avatar
landmeterbeuckx
V.I.P Member
V.I.P Member
Posts: 1633
Joined: Tue May 01, 2012 5:19 pm
12
Full Name: Lieven Beuckx
Company Details: Studiebureau Beuckx
Company Position Title: Owner
Country: Belgium
Linkedin Profile: Yes
Has thanked: 188 times
Been thanked: 566 times

Re: 360° lighting for 3D laser scanner

Post by landmeterbeuckx »

sim.herrod wrote: Thu Mar 21, 2024 9:12 am
landmeterbeuckx wrote: Thu Mar 21, 2024 7:04 am
Scott.Warren wrote: Wed Mar 20, 2024 5:14 pm https://bushman-panoramic.com/products/halo-360-light

I like this little guy, has a threading on top for the BLK360 adapter.
Hi Scott,
Seen this before. Does it perform well enough?
We use one of these under our insta360X3 or Theta Z1and it's very good, but we built our own lighting rig with 6 led panels to go under our Faro as we didn't think the Halo was bright enough for scanning.

Next job is to use the same LED panels and 3D print some brackets for our VLX.
sweet, could you post some pictures?
LSBbvba
Surveying services - 3D Laserscanning
Tel : +32477753126
www.lsbbvba.be
[email protected]
sim.herrod
V.I.P Member
V.I.P Member
Posts: 355
Joined: Thu Jan 14, 2016 12:26 pm
8
Full Name: Simeon Herrod
Company Details: Terra Measurement Limited
Company Position Title: 3D Data Manager
Country: UK
Linkedin Profile: No
Has thanked: 79 times
Been thanked: 111 times

Re: 360° lighting for 3D laser scanner

Post by sim.herrod »

Will do, next week.
User avatar
RobM
I have made 100> posts
I have made 100> posts
Posts: 105
Joined: Mon Aug 22, 2016 9:55 am
7
Full Name: Robin Miller
Company Details: My own boss
Company Position Title: Managing Director
Country: Germany
Linkedin Profile: No
Has thanked: 5 times
Been thanked: 17 times

Re: 360° lighting for 3D laser scanner

Post by RobM »

I've been using it for about a year too.. works like a charm. Heres a pic for you Lieven
IMG_8232.JPG
You do not have the required permissions to view the files attached to this post.
fpensa
I have made 50-60 posts
I have made 50-60 posts
Posts: 55
Joined: Wed Jan 24, 2018 12:51 pm
6
Full Name: Gianni Epinotto
Company Details: GC CM
Company Position Title: BIM Manager
Country: Canada
Has thanked: 9 times
Been thanked: 9 times

Re: 360° lighting for 3D laser scanner

Post by fpensa »

sim.herrod wrote: Thu Mar 21, 2024 9:12 am
landmeterbeuckx wrote: Thu Mar 21, 2024 7:04 am
Scott.Warren wrote: Wed Mar 20, 2024 5:14 pm https://bushman-panoramic.com/products/halo-360-light

I like this little guy, has a threading on top for the BLK360 adapter.
Hi Scott,
Seen this before. Does it perform well enough?
We use one of these under our insta360X3 or Theta Z1and it's very good, but we built our own lighting rig with 6 led panels to go under our Faro as we didn't think the Halo was bright enough for scanning.

Next job is to use the same LED panels and 3D print some brackets for our VLX.
Hi, do you use your 360 camera for software like OpenSpace, Holobuilder, Cupix, Structsite, ...? We use OpenSpace and pictures quality drop drastically in low lights conditions (which are a consistent portion of a typical construction building), so solution might help
Post Reply

Return to “Laser Scanning Europe”