What do you use PolyWorks For?

Discuss PolyWorks software here.
Post Reply
dschroder
I have made 40-50 posts
I have made 40-50 posts
Posts: 43
Joined: Mon Mar 24, 2014 1:59 pm
9
Full Name: Dan Schroder
Company Details: Co-Line
Company Position Title: Quality Assurance
Country: USA
Linkedin Profile: No

What do you use PolyWorks For?

Post by dschroder »

Just curious what everybody else on the forum uses PolyWorks for in their own line of work(or if you do it for fun)?

I feel that I am the minority here using it for small part inspection and some reverse engineering. I spend a lot of my time in IMInspect for comparing back to CAD models and also measuring features that would be difficult with conventional tools. I also use IMEdit to create NURBS of profiles or sketches of mechanical features.

I know there is much more that it PolyWorks is capable of that I never see, just wondering what the average LSF goer uses most often.
User avatar
Dave Andrews
V.I.P Member
V.I.P Member
Posts: 172
Joined: Thu Oct 18, 2012 8:58 pm
11
Full Name: Dave Andrews
Company Details: R.E. Warner Associates Inc.
Company Position Title: 3d Scanning Coordinator
Country: USA
Linkedin Profile: Yes
Location: Canton, Ohio
Has thanked: 2 times
Been thanked: 22 times
Contact:

Re: What do you use PolyWorks For?

Post by Dave Andrews »

I use it for tanks and checking the occasional fitting of scans. sometimes I will scan an intersection or something and I will use the polyline extract features. I have also used it for centerline tracking of pipe.

We use it mostly for our Laser Trackers and it is great once you figure it all out.

DA
"The harder you work, the harder it is to surrender."
Woody Hayes
User avatar
drewk1
I have made 10-20 posts
I have made 10-20 posts
Posts: 10
Joined: Wed May 30, 2012 5:44 pm
11
Full Name: Andrew Kerrison
Company Details: Hadleigh castings
Company Position Title: QA Engineer
Country: England
Linkedin Profile: Yes
Location: England
Has thanked: 7 times
Been thanked: 1 time

Re: What do you use PolyWorks For?

Post by drewk1 »

Scanning Aluminium castings and comparing to CAD mainly.
Sometimes scanning patterns and the occasional reverse engineering job.

Nothing too exciting, just ImInspect stuff.
3D_scan_dude
I have made 10-20 posts
I have made 10-20 posts
Posts: 10
Joined: Sat Apr 22, 2023 2:52 pm
Full Name: John Henry
Company Details: DuBold Design
Company Position Title: DuBold Design
Country: United States
Linkedin Profile: No
Been thanked: 2 times

Re: What do you use PolyWorks For?

Post by 3D_scan_dude »

PolyWorks is great with my HandySCAN for part inspection! It has all of the tools to do everything we need to do. We do reverse engineering and part inspection for aircraft MRO.
eccs19
I have made <0 posts
I have made <0 posts
Posts: 3
Joined: Fri Jan 07, 2022 3:56 pm
2
Full Name: Mark Evers
Company Details: FP Manufacturing
Company Position Title: Technical Support Staff Die Maintenance
Country: Canada
Has thanked: 3 times

Re: What do you use PolyWorks For?

Post by eccs19 »

I work in a stamping facility and I mainly use it for comparing replacement die blocks that come in and compare the scans to CAD. Also we receive a lot of dies that don't have any CAD for them, so I use a combination of VX Elements (for scanning), Polyworks for scan analysis, then Catia for doing the reverse engineering. IMO, Polyworks is great for this except for the Modeler part of it. It's great for getting polylines, etc, but horrible for freeform surfaces that need to be replicated. I lately have been using VX Model for freeform surfaces. Much easier and better matching for freeform surfaces.
Post Reply

Return to “PolyWorks”