Hardwarerror3 on a HDS6200

Faro FOCUS S350, S150, S70, M70, X30, X130, X130HDR, X330, X330HDR. Leica RTC360, C10, P15, P20, P30, P40, P50, BLK360, HDS6*00, HDS7000,HDS8800, HDS8400. Riegl VZ6000, VZ4000, VZ2000, VZ1000 & VZ400i. Topcon GTL-1000, GLS2200, GLS1500. Trimble X7, X9, X12, SX12, SX10, TX8, TX6, S7 & S9. Z+F IMAGER 5016, 5010X, 5010C, 5006H, 5006EX & PROFILER 9012
Post Reply
christopherbyrne18
V.I.P Member
V.I.P Member
Posts: 392
Joined: Thu Jan 17, 2008 8:18 pm
15
Full Name: Christopher Byrne
Company Details: Murphy Geospatial
Company Position Title: Head Of Dept Special Projects
Country: Ireland
Linkedin Profile: Yes
Has thanked: 9 times
Been thanked: 19 times

Hardwarerror3 on a HDS6200

Post by christopherbyrne18 »

Can anyone shed some light on the Hardwarerror3 on a HDS6200?
HDS6200 Error 3.jpg
I've seen a post about a Hardwareerror2 on a 6100. This is a lightly used instrument that hs been in storage for a quite a while.

Regards,

Chris
You do not have the required permissions to view the files attached to this post.
Top
mzsofi
I have made <0 posts
I have made <0 posts
Posts: 1
Joined: Fri Oct 19, 2018 6:48 pm
5
Full Name: Zsófia Magyari
Company Details: Széchenyi István University
Company Position Title: junior assistant professor
Country: Hungary
Linkedin Profile: No

Re: Hardwarerror3 on a HDS6200

Post by mzsofi »

I work with the same instrument and report the same error after switching on. Has anyone found a solution to this problem? According to Hungarian support it is not worth it to send it to Germany. This is really sad.

Regards
Zsófi
Top
PaoloDP
I have made <0 posts
I have made <0 posts
Posts: 2
Joined: Mon Jun 06, 2022 7:10 am
1
Full Name: Paolo Del Ponte
Company Details: Ivicom
Company Position Title: designer
Country: Croatia
Skype Name: pdponte
Linkedin Profile: Yes

Re: Hardwarerror3 on a HDS6200

Post by PaoloDP »

Hi, any update about that issue? I got same error on our HDS6200. I know it is a very old scanner but it was working and we used it till now.
Top
RThomasC_360
I have made <0 posts
I have made <0 posts
Posts: 9
Joined: Sun Jun 05, 2022 11:25 am
1
Full Name: Warnier Thomas
Company Details: Leica-Geosystems
Company Position Title: Technical Support Engineer 3D-Beginner
Country: France
Linkedin Profile: Yes

Re: Hardwarerror3 on a HDS6200

Post by RThomasC_360 »

Hi !
Try to reboot. Had a thing like this with a P30...Drive was Dead.... SSD down
If its frozen.... call Leica Support...

Does it usually controlled by Leica?
Top
PaoloDP
I have made <0 posts
I have made <0 posts
Posts: 2
Joined: Mon Jun 06, 2022 7:10 am
1
Full Name: Paolo Del Ponte
Company Details: Ivicom
Company Position Title: designer
Country: Croatia
Skype Name: pdponte
Linkedin Profile: Yes

Re: Hardwarerror3 on a HDS6200

Post by PaoloDP »

How do you mean reboot? I have tried on/off serval times, tried with different battery, even disassembly front cover to see MBO, nothing suspicious there. I even flash the BIOS by removing the RAM. I am also thinking that something happen with HDD or SSD. It has one 4GB Flash card inside, error is the same even when I remove it.
Is there any way to connect it to external monitor, because I see on MBO there is a VGA port and PS2 for keyboard? Anyone tried?
It was not controlled in Leica last 8 years :) I already call local Leica office, but they said that it is not worth to send it to service. It is too old.
Top
cpw006
V.I.P Member
V.I.P Member
Posts: 328
Joined: Tue Nov 20, 2007 3:51 am
16
Full Name: Chris Widmer
Company Details: KCI
Company Position Title: 3D Scanning Manager
Country: USA
Linkedin Profile: Yes
Location: Atlanta, Georgia
Has thanked: 3 times
Been thanked: 8 times

Re: Hardwarerror3 on a HDS6200

Post by cpw006 »

Contact Z+F and see if they are willing to work on it or with you. We had an older HDS6100 that Leica stopped servicing and we were able to send it to Z+F-USA to get calibrated and serviced. We used them to support this model until we traded it in a few years ago.
Top
cpw006
V.I.P Member
V.I.P Member
Posts: 328
Joined: Tue Nov 20, 2007 3:51 am
16
Full Name: Chris Widmer
Company Details: KCI
Company Position Title: 3D Scanning Manager
Country: USA
Linkedin Profile: Yes
Location: Atlanta, Georgia
Has thanked: 3 times
Been thanked: 8 times

Re: Hardwarerror3 on a HDS6200

Post by cpw006 »

cpw006 wrote: ↑Tue Jun 07, 2022 12:45 pm Contact Z+F and see if they are willing to work on it or with you. We had an older HDS6100 that Leica stopped servicing and we were able to send it to Z+F-USA to get calibrated and serviced. We used them to support this model until we traded it in a few years ago.
The HDS6000 series scanners are a Z+F product rebranded by Leica.
Top
tariqalmurri
I have made <0 posts
I have made <0 posts
Posts: 7
Joined: Sat Nov 20, 2021 12:50 am
2
Full Name: TARIQ MOHAMAD HASAN
Company Details: Diwan
Company Position Title: CEO
Country: Egypt
Linkedin Profile: No
Been thanked: 1 time

Re: Hardwarerror3 on a HDS6200

Post by tariqalmurri »

I had the same problem, and it was solved by replacing the bios battery with new one and it will work fine again
Top
Post Reply

Return to “Terrestrial Laser Scanners [TLS]”