Z+F Laser control C2C Registration result

Discuss Z+F Laser Control software here.
Post Reply
User avatar
Peyman Bashiri
V.I.P Member
V.I.P Member
Posts: 435
Joined: Sun Dec 13, 2009 6:32 pm
14
Full Name: Peyman Bashiri
Company Details: Aero Geometrics Canadian Z+F reseller
Company Position Title: Laser scanning and BIM Specialist
Country: Canada
Skype Name: pbashiri2003
Linkedin Profile: Yes
Location: Vancouver,BC
Has thanked: 58 times
Been thanked: 41 times
Contact:

Z+F Laser control C2C Registration result

Post by Peyman Bashiri »

Hello Forum,
I want to share with you the latest job we have done so far. Five levels of office building, 237,000 sq ft (22,000 sqm), 868 scans with Z+F 5016A, Z+F Laser control V9.34- all C2C registered within 2.91mm.The next step, Revit model.
You do not have the required permissions to view the files attached to this post.
Last edited by Peyman Bashiri on Wed Aug 30, 2023 7:58 pm, edited 1 time in total.
User avatar
Kruse
V.I.P Member
V.I.P Member
Posts: 413
Joined: Tue Jul 27, 2021 3:09 pm
2
Full Name: Eric Kruse
Company Details: Hensel Phelps - Construction
Company Position Title: VDC Manager
Country: United States
Linkedin Profile: No
Has thanked: 78 times
Been thanked: 219 times

Re: Z+F Laser control C2C Registration result

Post by Kruse »

Peyman Bashiri wrote: Tue Aug 29, 2023 7:34 pm Hello Forum,
I want to share with you the latest job we have done so far. Five levels of office building, 237,000 sq ft (22,000 sqm), 868 scans with Z+F 5016A, Z+F Laser control V9.34- all C2C registered within 9.21mm.Next step, Revit model.
Nice!!! Out of curiosity, did you capture imagery with all the setups as well? What were the typical scan densities used for the setups (~how many millions of points per setup). How big was the project size in the end (GB and how many Billions of points in the end)?
User avatar
Peyman Bashiri
V.I.P Member
V.I.P Member
Posts: 435
Joined: Sun Dec 13, 2009 6:32 pm
14
Full Name: Peyman Bashiri
Company Details: Aero Geometrics Canadian Z+F reseller
Company Position Title: Laser scanning and BIM Specialist
Country: Canada
Skype Name: pbashiri2003
Linkedin Profile: Yes
Location: Vancouver,BC
Has thanked: 58 times
Been thanked: 41 times
Contact:

Re: Z+F Laser control C2C Registration result

Post by Peyman Bashiri »

You won`t need imaging and colorized point cloud for this kind of job unless it is stated by the client. The resolution is between 12.6 mm@10 m ( took 1.30 minutes) and 6mm@10 m it took 3 minutes.
The file sizes are very reasonable as well. the 6mm scan file are 340 MB and 10mm is 85mb.
Peyman
vinodhk
I have made <0 posts
I have made <0 posts
Posts: 3
Joined: Tue Apr 11, 2023 7:04 pm
1
Full Name: vinodh
Company Details: Surtech middle east
Company Position Title: Surveyor
Country: abu dhabi
Linkedin Profile: Yes

Re: Z+F Laser control C2C Registration result

Post by vinodhk »

what is the best way to handle 1000 scans in a single overview? also, how do we check the registration after completing the registration of 1000 scans? FYI, we have to scan the whole plant(we segregated the plant into small units, the total number of scans will be more than 5000), every unit's point cloud should match with each other within 5mm.
I would love to hear if you have any suggestions for me. This is really chalanging for me.
Post Reply

Return to “Z+F Laser Control”