Split Face of Step form underside

Discuss Leica Cyclone 3DR software here.
Post Reply
b_clive
Forum Supporter
Forum Supporter
Posts: 111
Joined: Thu Nov 08, 2012 11:42 am
11
Full Name: Clive Bugeja
Company Details: ARC International Surveyors Ltd.
Company Position Title: Surveyor
Country: Malta
Has thanked: 8 times
Been thanked: 1 time

Split Face of Step form underside

Post by b_clive »

Dear all,

Is there a way I can split the face of the step from its underside?

https://drive.google.com/file/d/1_Jcw11 ... sp=sharing
https://drive.google.com/file/d/1YNNFLJ ... sp=sharing
Nicolas L
I have made 100> posts
I have made 100> posts
Posts: 106
Joined: Tue Sep 01, 2020 8:25 am
3
Full Name: Nicolas LANDRIVON
Company Details: Technodigit
Company Position Title: Sales and Support
Country: France
Linkedin Profile: Yes
Been thanked: 48 times

Re: Split Face of Step form underside

Post by Nicolas L »

Hello

Just to be sure, something like that ?

Regards

Nicolas L
You do not have the required permissions to view the files attached to this post.
b_clive
Forum Supporter
Forum Supporter
Posts: 111
Joined: Thu Nov 08, 2012 11:42 am
11
Full Name: Clive Bugeja
Company Details: ARC International Surveyors Ltd.
Company Position Title: Surveyor
Country: Malta
Has thanked: 8 times
Been thanked: 1 time

Re: Split Face of Step form underside

Post by b_clive »

Hi Nicolas,

Yes exactly. Can you explain in brief how you finished up with this result?
Nicolas L
I have made 100> posts
I have made 100> posts
Posts: 106
Joined: Tue Sep 01, 2020 8:25 am
3
Full Name: Nicolas LANDRIVON
Company Details: Technodigit
Company Position Title: Sales and Support
Country: France
Linkedin Profile: Yes
Been thanked: 48 times

Re: Split Face of Step form underside

Post by Nicolas L »

The method that I used:

- Building extractor (manual and semi-automatic extraction of the top side of each step)
- I grouped all separated mesh to make a compound
- I separate the compound mesh from the cloud using a distance (for instance 5 cm) - Clean Separate with...

PS: create a suitable UCS if necessary beforehand (like Wall + Wall).

Another way if you want to keep the top steps with the rest of the cloud but without the downside part:
- create a quick mesh (Scan to mesh)
- Separate the bottom side of the stairs, use Clean Separate in the Surface modeling menu (camera position -Z and select the option back, only visible triangles according to the normal direction of the created mesh)
- Keep cleaning the mesh if necessary to focus on the main part
- Smooth
- Separate the point cloud with the mesh (5 cm for instance)

Regards

Nicolas L
b_clive
Forum Supporter
Forum Supporter
Posts: 111
Joined: Thu Nov 08, 2012 11:42 am
11
Full Name: Clive Bugeja
Company Details: ARC International Surveyors Ltd.
Company Position Title: Surveyor
Country: Malta
Has thanked: 8 times
Been thanked: 1 time

Re: Split Face of Step form underside

Post by b_clive »

Hi Nicolas,

Appreciate your reply. Will try it out and let you know how it goes.
Post Reply

Return to “Leica Cyclone 3DR”