3D Scanning for 3D Printing

Discuss all 3D Prining issues here.
Post Reply
User avatar
MaxFunkner
I have made <0 posts
I have made <0 posts
Posts: 2
Joined: Tue Oct 05, 2021 1:34 pm
1
Full Name: Max Funkner
Company Details: 3DWithUs
Company Position Title: Co-Founder
Country: United Kingdom
Linkedin Profile: Yes
Been thanked: 1 time
Contact:

3D Scanning for 3D Printing

Post by MaxFunkner »

Hi all, I am Max from 3DWithUs.
I am a big fan of 3D scanning for 3D printing and published a lot of blogs on the subject with original images. I haven’t had experience with the industrial-grade laser scanners, yet, but keep trying out the ones that come out on the consumer market. In almost all cases 3D printing is involved.
I hope you will find our articles insightful. If you come across something interesting in this area, please let me know.
JaffH
I have made <0 posts
I have made <0 posts
Posts: 6
Joined: Wed Apr 27, 2022 7:50 am
Full Name: Jaffrey Holeme
Company Details: 43 dprint
Company Position Title: Marketing Manager
Country: United States
Linkedin Profile: No

Re: 3D Scanning for 3D Printing

Post by JaffH »

Hi. Thanks for sharing. I am just a beginner in 3d printing and looking for some support on 3d forums. When I was looking for my first printer I also searched for advice and reviews. I purchased one from this review https://43dprint.org/best-3d-printers-under-200/.
I found your article '3D Printing Tips & Tricks' really useful. You are saying that Many of the objects require a lot of supports to be added, in there. Is there a way to minimize the supports in order to save material?

Thanks
Dirkie2710
I have made 50-60 posts
I have made 50-60 posts
Posts: 55
Joined: Sun Jan 14, 2018 2:06 pm
5
Full Name: Dirkie Uys
Company Details: Landpartners
Company Position Title: Surveyor
Country: Australia
Skype Name: duaus
Linkedin Profile: No
Has thanked: 3 times
Been thanked: 9 times

Re: 3D Scanning for 3D Printing

Post by Dirkie2710 »

JaffH wrote: Sat May 14, 2022 11:18 am Is there a way to minimize the supports in order to save material?
You can do a few things. Orientation of the item on the bed is one way.

Imagine a cylinder printed open side facing down. Would require lots of support. Flip it 180 with open side facing up. No support needed. your object may need support regardless of the orientation, but try other orientations to see which require the least amount of supports.

Depending on which slicer you use, there are a number of options for supports. I use Cura. They have some interesting supports (like the tree one) and you can change the infill etc of supports. There is also a plugin for cura to create your own supports. Pretty useful when you don't need an entire support for a wing, just some support at a tip

https://ultimaker.com/learn/ultimaker-c ... ilable-now


youtu.be/95DFDGqyMGU
User avatar
Scott.Warren
V.I.P Member
V.I.P Member
Posts: 347
Joined: Tue Jan 30, 2018 3:14 pm
5
Full Name: Scott Warren
Company Details: WSP Canada
Company Position Title: Project Manager - Geomatics Engineer
Country: Canada
Linkedin Profile: Yes
Location: Dartmouth, Nova Scotia, Canada
Has thanked: 38 times
Been thanked: 103 times
Contact:

Re: 3D Scanning for 3D Printing

Post by Scott.Warren »

I'm a big fan of using Tree supports (Cura) when things get complex, but often use more regular patterns if the overhang is simple.

With slicers you can edit the parameters of almost everything, so if you want thicker walled supports, or thinner support towers, you can make those changes. Lots of good videos on how to get good quality of your prints, but it comes down to trial and error, and learning all about how molten plastic behaves with your printer in your own environment. You can tweak the support settings with values like '% overhang to support', which would increase or decrease the amount of supports used for a given model.
User avatar
Scott.Warren
V.I.P Member
V.I.P Member
Posts: 347
Joined: Tue Jan 30, 2018 3:14 pm
5
Full Name: Scott Warren
Company Details: WSP Canada
Company Position Title: Project Manager - Geomatics Engineer
Country: Canada
Linkedin Profile: Yes
Location: Dartmouth, Nova Scotia, Canada
Has thanked: 38 times
Been thanked: 103 times
Contact:

Re: 3D Scanning for 3D Printing

Post by Scott.Warren »

20200818_103930.jpg
Lots of sanding left to do on this one!
You do not have the required permissions to view the files attached to this post.
joee09
I have made <0 posts
I have made <0 posts
Posts: 5
Joined: Wed Jul 13, 2022 12:10 pm
Full Name: jasmines
Company Details: houseandbeyond
Company Position Title: IT manager
Country: UK
Has thanked: 2 times

Re: 3D Scanning for 3D Printing

Post by joee09 »

I have the new Structure II scanner and QIDI TECH X-Plus printer, and scanner sucks, like doesn’t work at all. $500 paperweight. They keep saying that they are working on it, but it still doesn’t work. Really looking forward to Apple killing off all these crappy scanners with built in scanners on their iPad Pros.
Martin_au
V.I.P Member
V.I.P Member
Posts: 258
Joined: Thu Oct 15, 2009 12:51 pm
13
Full Name: Martin Ankor
Company Details: TasWater
Company Position Title: Surveyor
Country: Australia
Has thanked: 3 times
Been thanked: 9 times

Re: 3D Scanning for 3D Printing

Post by Martin_au »

I'm a fan of the iPad/iPhone LiDAR. Here's one I did recently with Scaniverse. Worked very well.
https://www.reddit.com/r/functionalprin ... one_lidar/

I've just ordered a little structured light scanner (Revopoint). Interested to see how that turns out.
User avatar
Jason Warren
Administrator
Administrator
Posts: 4075
Joined: Thu Aug 16, 2007 9:21 am
15
Full Name: Jason Warren
Company Details: Laser Scanning Forum Ltd
Company Position Title: Co-Founder
Country: UK
Skype Name: jason_warren
Linkedin Profile: No
Location: Retford, UK
Has thanked: 335 times
Been thanked: 184 times
Contact:

Re: 3D Scanning for 3D Printing

Post by Jason Warren »

Martin_au wrote: Thu Jul 14, 2022 10:07 am I'm a fan of the iPad/iPhone LiDAR. Here's one I did recently with Scaniverse. Worked very well.
https://www.reddit.com/r/functionalprin ... one_lidar/

I've just ordered a little structured light scanner (Revopoint). Interested to see how that turns out.
Nice one, let us know how you get on with the Revopoint... ;)
Jason Warren
Co_Founder

Dedicated to 3D Laser Scanning
LaserScanningForum
Post Reply

Return to “3D Printing”