Hello!
I know this is a shot in the dark cause its a decade old software. But I'm working for my university to make a reverse engineering workflow for education purposes using a Roland LPX-600, and LPX Studio and Geomagic Studio 12.
My general process has been to take my scanned point cloud then, Wrap -> Mesh Doctor -> Parametric Surface -> Fit Surfaces -> Fit Connections -> Trim and Stitch. I've been able to complete this without any errors but when I try to save the "stitched" model as an STP file, the file has no data (ie 0 KB of data). I can't seem to figure out why it's saving an empty file. If anyone has any ideas, your help would be greatly appreciated!
I can provide any files if needed.
Help with Geomagic Studio 12
-
- I have made <0 posts
- Posts: 1
- Joined: Tue Sep 20, 2022 7:32 pm
- 1
- Full Name: Raveen
- Company Details: McMaster University
- Company Position Title: Student
- Country: Canada
-
- I have made 30-40 posts
- Posts: 39
- Joined: Tue Jan 04, 2022 12:15 pm
- 2
- Full Name: Chris Dordoni
- Company Details: laser scanning and CAD modeling
- Company Position Title: scanning technician
- Country: US
- Linkedin Profile: No
- Has thanked: 2 times
- Been thanked: 19 times
Re: Help with Geomagic Studio 12
I don't have specific experience with Geomagic Studio 12; however, with other software sometimes there are options to set such as BREP, or manifold solid.
If your object is not a solid (ie surface only), and you are setting an export option that specifies a solid then you could end up with 0 output.
If your object is not a solid (ie surface only), and you are setting an export option that specifies a solid then you could end up with 0 output.