register 360 ucs

Discuss Leica Geosystems hardware here.
Post Reply
PaoloC
I have made <0 posts
I have made <0 posts
Posts: 8
Joined: Wed Sep 29, 2021 3:15 pm
Full Name: CAMPANA PAOLO
Company Details: Smartargets Srl
Company Position Title: Bim Coordinator
Country: Italia
Linkedin Profile: No

register 360 ucs

Post by PaoloC »

Hi,
i registered some scans using control points, i would to use one control point as ucs, for some reason when i put coordinate of point in ucs creation tool register set the right point but it change the orientation.
Is it possible to set the point and mantain the orientation related to control points?
Thanks in advance
User avatar
geomontgomery
V.I.P Member
V.I.P Member
Posts: 153
Joined: Thu Sep 13, 2018 3:23 pm
4
Full Name: George Montgomery
Company Details: ECE Design
Company Position Title: Support Manager
Country: USA
Linkedin Profile: Yes
Has thanked: 19 times
Been thanked: 36 times

Re: register 360 ucs

Post by geomontgomery »

Are you wanting the new "UCS" at the control point to be 0,0,5 or something? Why not just add the northing, easting, elevation delta (YXZ) to it and all the other control points in your control.txt file?

Or, register and export it once with control, then reimport it, and when you use the ucs tool it will use the control as default orientation for the ucs tool.
Post Reply

Return to “Leica Geosystems”