Drone pick up against design cut/fill calculation

Discuss Leica Cyclone 3DR software here.
Post Reply
Anguyen1984
I have made <0 posts
I have made <0 posts
Posts: 1
Joined: Fri Jun 17, 2022 2:55 am
1
Full Name: Andrea Nguyen
Company Details: none
Company Position Title: Surveyor
Country: Australia
Linkedin Profile: No

Drone pick up against design cut/fill calculation

Post by Anguyen1984 »

Hi,
I'm new to 3DR.
I work in mining and we get often to fly the drone with RTK to check that the batter of the open pit are pulled to design.
I know how to create a heatmap to show undercut or overcut, but I can't find the way to show the volume of the material for these areas.
Thanks in advance for the help. Hopefully someone could explain step by step the procedure to create a cut/fill report.
Nicolas L
I have made 100> posts
I have made 100> posts
Posts: 106
Joined: Tue Sep 01, 2020 8:25 am
3
Full Name: Nicolas LANDRIVON
Company Details: Technodigit
Company Position Title: Sales and Support
Country: France
Linkedin Profile: Yes
Been thanked: 48 times

Re: Drone pick up against design cut/fill calculation

Post by Nicolas L »

Hello Andrea,

Have you consulted the Help Center of Cyclone 3DR (Help menu or press F1)?
In the Analysis menu, Measure (first Icon), you can find a function called Cut and Fill, if this is what you are looking for.
This command calculates, according to a given axis (usually Z), the embankment and excavation of two mesh models, having or not the same contours (in this case the volume is approximated).

Feel free to contact directly CR Kennedy in Australia, there are very skilled people in Cyclone 3DR.

Regards

Nicolas L
Post Reply

Return to “Leica Cyclone 3DR”