Hi all,
Our team is growing! and we have two job offers. Please check these requirements below.
If you have any questions, please contact us. Thank you.
Best,
TG
Reality Capture Specialist – position 1
(Junior/Graduate 3D surveyor)
Output Precision is currently looking for ‘Junior/Graduate or start level of (3D Surveyor) to join our rapidly growing team. we are seeking for a specific candidate with 1–2-years’ experience with 3D Laser Scanning, AutoCAD and/or Revit, ideally with understanding ‘Scan to BIM’ workflow. The candidate should demonstrate the following:
Requirements
1. Knowledge and experience in working with 3D point cloud data.
2. Knowledge and experience in working with 3D Laser scanners (preferable Leica), Matterport, measured surveys, topographical survey.
3. Experience in AutoCAD (2D and 3D drawings), Leica Cyclone Core (Register) and 360, LSS software
4. Knowledge of survey techniques. Attention to details and excellent time management and focusing on the delivery deadlines.
5. UK clean driving license
6. Holder of CSCS card
7. Experience in as-built 3D modelling in REVIT (not essential)
7. Experience in as-built 3D modelling in ArchiCAD (not essential)
8. Experience with photogrammetry and Reality Capture software (not essential)
9. UK based candidate
10. Good writing and commutative English
11.Willing to work around the UK and world
12. Familiar with Microsoft Excel and Word and other Microsoft products
13. Knowledge and interest of BIM Methodology
Candidate
The person will be responsible for the delivery of the 3D scan data, 3D/2D models in Revit and AutoCAD and photogrammetry outputs.
The availability to work on site (nationwide and international-wide) with 3D laser scanners will be beneficial, this will require travel and some overnight staying, in house training will be provided.
We are working on the various projects for AEC sector (Architecture, Structure and Engineering) and for property sector and marketing.
Offer
• Salary and Benefits depends on the candidates experience and skills
• Pension scheme
• Scheme of bonuses (e.g. Performance, yearly) and payable overtime
• Scheme of the training (in-house and external)
• Opportunity to work home, office and from site
• 60-70% office-based work and 30-40% on site
• Working on various prestigious projects
• And other bonuses scheme too
Why Output Precision team?
OutPut Precision team is working with passion and always looking for passionate team members who loves their work. We are Manchester based team and we are working mainly in the UK but we have projects from Europe and the USA and Canada. Our company was founded in 2017 and start from this point is still growing and
Output team is using the newest reality capture technologies.
If you think that you can join us, please send us your CV and/or portfolio to [email protected] or contact us for more information.
Please note, strictly no agencies
Reality Capture Specialist – position 2
Graduate/Junior Revit Technician
Output Precision is currently looking for ‘Graduate/Junior Revit Technician’ to join our rapidly growing team. Please note that is not a design position – we are seeking for a specific candidate with 1 year experience with AutoCAD and/or Revit, ideally with understanding ‘Scan to BIM’ workflow. The candidate should demonstrate the following:
1. Knowledge and experience in working with 3D point cloud.
2. Experience in as-built 3D modelling in REVIT
3. Experience with Dynamo, Python (not essential)
4. Experience in as-built 3D modelling in ArchiCAD (not essential)
5. Experience in AutoCAD (2D drawings)
6. Attention to details
7. Excellent time management and focusing on the delivery deadlines.
8. Willing to work around the UK and international wide on various projects
9. Basic knowledge of survey techniques
10. UK clean driving license
11. Holder of CSCS card (not essential)
12. Good writing and commutative English
13. Familiar with Microsoft Excel and Word and other Microsoft products
14. Knowledge and interest of BIM Methodology
15. Coordinate projects and reality capture solutions
Candidate
The person will be responsible for the delivery of the 3D/2D models in Revit and AutoCAD.
The availability to work occasionally on site (nationwide) with 3D laser scanners will be beneficial, this will require travel and some overnight staying, in house training will be provided.
We are working on the various projects for AEC sector (Architecture, Structure and Engineering) and for property sector and marketing.
60-70% office work and 30-40% on site
Offer
• Salary and Benefits depends on the candidates experience and skills
• Pension scheme
• Scheme of bonuses (e.g. Performance, yearly) and payable overtime
• Scheme of the training (in-house and external)
• Opportunity to work home, office and from site
• 70-80% office-based work and 20-30% on site
• Working on various prestigious projects
• And other bonuses scheme too
Why Output Precision team?
OutPut Precision team is working with passion and always looking for passionate team members who loves their work. We are Manchester based team and we are working mainly in the UK but we have projects from Europe and the USA and Canada. Our company was founded in 2017 and start from this point is still growing and Output team is using the newest reality capture technologies.
If you think that you can join us, Please send us your CV and/or portfolio to [email protected] or contact us for more information.
Please note, strictly no agencies
Reality Capture Specialists - 2 job offers - Manchester, UK -OPteam
Is your company expanding or simply on the look out for experinced laser scanner users then you can try to recruit staff here.
Post Reply
1 post
• Page 1 of 1
-
- V.I.P Member
- Posts: 220
- Joined: Wed Dec 23, 2009 9:38 am
- 14
- Full Name: Tomasz Gerlich
- Company Details: OutPut Precision Ltd
- Company Position Title: Director
- Country: UK
- Skype Name: tomek.gerlich
- Linkedin Profile: Yes
- Location: Manchester, UK
- Has thanked: 5 times
- Been thanked: 7 times
- Contact:
Reality Capture Specialists - 2 job offers - Manchester, UK -OPteam
-----
Best Regards,
Tomasz Gerlich
tomaszgerlich[at]outputprecision.com or tomaszgerlich[at]gmail.com
+44 7756613300
www.outputprecision.com - Reality Capture
www.realitycapture3d.com - Matterport
OutPut Precision Ltd, Manchester, UK
Best Regards,
Tomasz Gerlich
tomaszgerlich[at]outputprecision.com or tomaszgerlich[at]gmail.com
+44 7756613300
www.outputprecision.com - Reality Capture
www.realitycapture3d.com - Matterport
OutPut Precision Ltd, Manchester, UK
Post Reply
1 post
• Page 1 of 1
Jump to
- General
- ↳ Announcements
- ↳ Introductions
- ↳ Opinion Polls
- ↳ General Chat
- Affiliated Associations
- ↳ CMS Coordinate Metrology Society
- ↳ Press Releases
- ↳ Get Kids Into Survey
- ↳ IAFSM
- ↳ openpointcloudformats.org
- ↳ USIBD
- Terrestrial Scanners
- ↳ Amberg
- ↳ Press Releases
- ↳ FARO
- ↳ Press Release
- ↳ Tutorials & Webinars
- ↳ Leica Geosystems
- ↳ Press Releases
- ↳ Tutorials & Webinars
- ↳ Maptek
- ↳ Riegl
- ↳ Press Releases
- ↳ Tutorials & Webinars
- ↳ Surphaser
- ↳ Press Releases
- ↳ Topcon
- ↳ Press Releases
- ↳ Tutorials & Webinars
- ↳ Trimble
- ↳ Press Releases
- ↳ Tutorials & Webinars
- ↳ Z+F
- ↳ Press Releases
- ↳ Tutorials & Webinars
- Dynamic Mapping Solutions
- ↳ FARO Orbis
- ↳ GeoSLAM
- ↳ KAARTA
- ↳ Leica BLK2GO | BLK2GO PULSE | BLK2FLY
- ↳ NavVis
- ↳ Webinars
- ↳ Virtual Demos
- ↳ ViAmetris
- Structured Light Scanners
- ↳ Matterport
- ↳ Press Releases
- ↳ Tutorials & Webinars
- Handheld Scanners
- ↳ DotProduct
- ↳ Mantis Vision
- ↳ Polyga
- Laser Scanning Hire & Accessories
- ↳ G2 Survey
- ↳ Laser Scanning Europe
- Web Platform Solutions [SaaS]
- ↳ 3DUserNet
- ↳ ATIS.cloud
- ↳ Cintoo Cloud
- ↳ Press Releases
- ↳ Tutorials & Webinars
- ↳ GeoSignum Pointer
- ↳ JP Global Digital
- ↳ NavVis IVION
- ↳ Pointerra
- ↳ POINTLY
- ↳ Pointshare +
- ↳ PREVU3D
- ↳ Skand
- ↳ Press Releases
- ↳ Tutorials & Webinars
- ↳ Vercator
- ↳ Press Releases
- ↳ Tutorials & Webinars
- IOS & Android Scanner Application Software
- ↳ Dot3D
- ↳ R3D
- ↳ R3D Showcase | Gallery
- ↳ Beta Testing | Bugs & Suggestions
- ↳ Sitescape
- ↳ Zappcha
- Software Suites
- ↳ Autodesk ReCap Studio
- ↳ Atlas SCC
- ↳ AVEVA Suite
- ↳ ClearEdge3D
- ↳ Clouds2Max
- ↳ CloudCompare
- ↳ Elysium
- ↳ FARO As-Built
- ↳ FARO SCENE
- ↳ FARO BuildIT CONSTRUCTION
- ↳ Geomagic
- ↳ Inovx
- ↳ Kohera3D
- ↳ Leica Cyclone 3DR
- ↳ Leica Cyclone, Cyclone REGISTER 360 & Cyclone FIELD 360
- ↳ Maptek PointStudio
- ↳ MeshLab
- ↳ NUBIGON
- ↳ OpenScanTools
- ↳ pinpoint
- ↳ PointCab
- ↳ Pointfuse
- ↳ Press Releases
- ↳ Tutorials & Webinars
- ↳ Pointools
- ↳ PIX4D
- ↳ PolyWorks
- ↳ Pythagoras
- ↳ Rapidform
- ↳ Rhino3D
- ↳ RiScan Pro & RiSOLVE
- ↳ ScanSap
- ↳ SCAN TO BIM
- ↳ TOPCON MAGNET Collage
- ↳ TopoDOT
- ↳ Blogs and Tutorials
- ↳ Webinars
- ↳ Trimble Realworks
- ↳ Undet
- ↳ Veesus
- ↳ Z+F Laser Control
- Scanning Hardware
- ↳ Terrestrial Laser Scanners [TLS]
- ↳ Other Hardware: Field & Back Office
- ↳ Hand Held Scanners
- ↳ Mobile Scanners
- ↳ Structured Light Scanners
- ↳ Robotic Scanning Solutions
- ↳ Total Station Scanners
- ↳ Cavity Scanners
- ↳ Dynamic Mapping Scanners
- ↳ UAV Scanning Solutions
- Scanning Projects
- ↳ Request Help With Projects
- ↳ Show off Past Projects
- Scanning Software
- ↳ Registration Software
- ↳ CAD Software
- ↳ Modeling Software
- ↳ Web Based Software
- ↳ Third Party Software & Plugins
- ↳ Meshing Software
- ↳ Open Source Software
- ↳ Deformation Analysis Software
- ↳ Software Download Links
- ↳ AutoLisp, DIESEL, Dynamo, VBA, Python & .Net Tools
- Virtual | Augmented Reality Solutions
- ↳ VR Virtual Reality
- ↳ AR Augmented Reality
- Industry Sectors
- ↳ 3D Printing
- ↳ Aerial Lidar
- ↳ Aerospace Industry
- ↳ Archaeology & Heritage
- ↳ Automotive Industry
- ↳ Computer Graphics Industry (CGI)
- ↳ Construction & Architecture
- ↳ Forensics & CSI
- ↳ Oil & Gas Industry
- ↳ Building Information Modeling [BIM]
- ↳ Shipbuilding Industry
- ↳ Tunnel & Mining
- ↳ Mobile Scanning
- ↳ Right of Light
- ↳ Underwater Scanning
- Galleries
- ↳ Image Gallery
- ↳ Video Gallery
- ↳ 360० Panoramas
- Other Related Issues
- ↳ Future Technology
- ↳ Recruitment
- ↳ Advertising
- ↳ Report Stolen Kit
- ↳ Any Other Issues
- ↳ For Sale & Wanted Items
- Learning Resources
- ↳ Training Workshops & Online Tutorials
- ↳ Articles, Webinars & Links
- ↳ Exhibitions & Conferences
- ↳ Tips & Advice
- ↳ Education & Courses
- ↳ Product Comparison
- ↳ Bugs & Issues
- ↳ Forum Suggestions