Hi all,
I do need some support for getting my registered scan data from cyclone IMP to cyclone register 360.
Or at least to be able to import the scans to register 360 and do the registration again.
Unfortunately I am not able to find the raw scans - and since I had to replace my BLK360 these files are also not available at the scanner anymore.
Could somebody please help?
Many thanks in advance,
Matthias
My actual setup: BLK360 (with no data from the project), Recap Pro, Cyclone Register 360 Demo, 3D Shaper Demo.
Import(or convert) IMP to Register 360
-
- I have made <0 posts
- Posts: 4
- Joined: Sat Sep 09, 2017 11:40 am
- 6
- Full Name: Matthias Mertens
- Company Details: UET GmbH
- Company Position Title: managing director
- Country: Deutschland
-
- I have made 50-60 posts
- Posts: 59
- Joined: Mon Mar 24, 2014 11:57 pm
- 10
- Full Name: Guy Cutting
- Company Details: Leica HDS
- Company Position Title: REGISTER 360 Product manager
- Country: USA
- Has thanked: 1 time
- Been thanked: 3 times
Re: Import(or convert) IMP to Register 360
Matthias,
You can export the Registered modelspace in Cyclone out to e57, if you want the images then right click on the Registration Scanworld and choose e57 with images. Then you can import that e57 into REG 360 and choose the Pre-Register option in the import area. The scans will come in with the registration from Cyclone and then you can modify/fix the registration.
Hope this helps
You can export the Registered modelspace in Cyclone out to e57, if you want the images then right click on the Registration Scanworld and choose e57 with images. Then you can import that e57 into REG 360 and choose the Pre-Register option in the import area. The scans will come in with the registration from Cyclone and then you can modify/fix the registration.
Hope this helps
-
- I have made <0 posts
- Posts: 4
- Joined: Sat Sep 09, 2017 11:40 am
- 6
- Full Name: Matthias Mertens
- Company Details: UET GmbH
- Company Position Title: managing director
- Country: Deutschland
Re: Import(or convert) IMP to Register 360
Guy,
thanks for your answer and the described workaround.
Unfortunately I have no valid license of cyclone running - only the viewer.
The registration was done during a demo due to some problems with the BLK360 and recap.
Is there any other way or do I have to ask LEICA for another "1 day demo" for exporting the scans?
thanks again and kind regards,
Matthias
thanks for your answer and the described workaround.
Unfortunately I have no valid license of cyclone running - only the viewer.
The registration was done during a demo due to some problems with the BLK360 and recap.
Is there any other way or do I have to ask LEICA for another "1 day demo" for exporting the scans?
thanks again and kind regards,
Matthias