Adjusting elevation of scan data in cylcone

Please feel free to ask other members for help with certain projects

Adjusting elevation of scan data in cylcone

Postby Callum Mincher » Thu Apr 20, 2017 3:39 pm

Hi All,

Could someone give me some advice on globally adjusting the level of a scan in cyclone?

We need to drop the scan data and was wondering what the best way to do this was?
Callum Mincher
I have made <0 posts
I have made <0 posts
 
Posts: 6
Joined: Mon Mar 13, 2017 4:07 pm
Full Name: Callum Mincher
Company Details: IKM Consulting Ltd
Company Position Title: Surveyor
Country: Scotland
Linkedin Profile: Yes

Re: Adjusting elevation of scan data in cylcone

Postby stevenramsey » Thu Apr 20, 2017 4:52 pm

As Usual in Cyclone a few ways to do this depending on your down stream desires.

One is to use the set coordinates by points. insert a vertex and make a note of its coordinates. select the vertex and set coordiantes to that point with the same x and y but with new z. this is a good and simple method for a single Modelspace. you can set that new system to be the default or keep both allowing you to pick and choose.

The other way is to re register it (even if you have unified it) find 2 targets. and make a text file of there coordinates while adjusting there z value. bring in your registered data and the new control. and it will move. remebering if you have unified to highlight the unified MS in the MS tab to bring through that object to the new registered scanworld
User avatar
stevenramsey
Global Moderator
Global Moderator
 
Posts: 1534
Joined: Sun Aug 12, 2007 9:22 pm
Location: London
Full Name: Steven Ramsey
Company Details: Leica Geosystems
Company Position Title: Technical Specialist Scanning EMEA
Country: UK
Skype Name: steven.ramsey
Linkedin Profile: Yes

Re: Adjusting elevation of scan data in cylcone

Postby Callum Mincher » Fri Apr 21, 2017 10:06 am

Thanks Steve, was a lot quicker than expected.
Callum Mincher
I have made <0 posts
I have made <0 posts
 
Posts: 6
Joined: Mon Mar 13, 2017 4:07 pm
Full Name: Callum Mincher
Company Details: IKM Consulting Ltd
Company Position Title: Surveyor
Country: Scotland
Linkedin Profile: Yes


Return to Request Help With Projects

Who is online

Users browsing this forum: No registered users and 5 guests

 
Stay in touch    RSS feed    Twitter    Youtube    Linkedin

LSF SPONSOR

Accessibility | Terms of Use | Privacy Policy
DouZa Webdesign