Hi all,
does somebody knows a way to get scans from a RTC360 with Register360 into Scene to implement it into Scenetogo ?
To transfer the pointcloud is no problem but the flatten view (via e57,ptx) is always head down....so it will be in Scenetogo....a bit exhausting to make headstands on the desk for that...
Thank you.
Leica scans in Scene
- pburrows145
- V.I.P Member
- Posts: 2152
- Joined: Wed Sep 12, 2007 9:16 am
- 16
- Full Name: Paul Burrows
- Company Details: Leica Geosystems Europe
- Company Position Title: Scanning Solutions Manager - Europe
- Country: UK
- Linkedin Profile: Yes
- Location: UK
- Has thanked: 109 times
- Been thanked: 123 times
Re: Leica scans in Scene
The ways you mention are the only ways...
What would be your preferred solution, out of interest?
What would be your preferred solution, out of interest?
- Carbix
- V.I.P Member
- Posts: 236
- Joined: Sat Mar 16, 2019 1:36 am
- 5
- Full Name: Daniel Loney
- Company Details: Excelsior Measuring
- Company Position Title: Owner
- Country: Canada
- Linkedin Profile: Yes
- Location: Canada
- Has thanked: 33 times
- Been thanked: 50 times
- Contact:
-
- V.I.P Member
- Posts: 213
- Joined: Tue Jul 03, 2018 8:23 am
- 5
- Full Name: Raimund Klink
- Company Details: IHM engineering GmbH
- Company Position Title: 3d scanning guy
- Country: Germany
- Linkedin Profile: No
- Has thanked: 193 times
- Been thanked: 25 times
-
- I have made 40-50 posts
- Posts: 40
- Joined: Fri Jan 04, 2013 3:28 pm
- 11
- Full Name: Uwe Bertoldo
- Company Details: Surveying Company
- Company Position Title: Managing Director
- Country: Germany
- Location: Germany/Heilbronn
- Has thanked: 1 time
- Been thanked: 1 time
- Contact:
Re: Leica scans in Scene
This is not about 3D.
Planar views of imported Leica scans from Register360 into Scene...via e57 or ptx...are always turned...means ground in the sky and opposite.
If such scans are used for creating Scnenetogo....the planar views in scenetogo will be turned as well....means they are useless...
Nobody had this issue before ?
Thank you.
Planar views of imported Leica scans from Register360 into Scene...via e57 or ptx...are always turned...means ground in the sky and opposite.
If such scans are used for creating Scnenetogo....the planar views in scenetogo will be turned as well....means they are useless...
Nobody had this issue before ?
Thank you.
-
- V.I.P Member
- Posts: 125
- Joined: Mon Nov 03, 2014 2:55 pm
- 9
- Full Name: Daniel Pompe
- Company Details: FARO
- Company Position Title: Team Lead Software Engineering
- Country: Germany
- Linkedin Profile: No
- Has thanked: 2 times
- Been thanked: 19 times
Re: Leica scans in Scene
Hey Uwe,
have you tried the creation of SCENE 2go data?
As long as the 3D coordinates of the points are correct it should work. You can easily check if the up direction is ok in a 3D view. SCENE 2go does not reuse the planar view image but creates new images from the 3D positions. Same holds for the quick view in SCENE.
Regards,
Daniel
have you tried the creation of SCENE 2go data?
As long as the 3D coordinates of the points are correct it should work. You can easily check if the up direction is ok in a 3D view. SCENE 2go does not reuse the planar view image but creates new images from the 3D positions. Same holds for the quick view in SCENE.
Regards,
Daniel