We have a Reg360 project that at one time had 2000 setups in it (making it 1.5tb). It was broken down to a specific area now made up of 400 setups.(the other 1600 were removed).
The file remains at 1.5tb and the storage folder still holds the unneeded setups.
Is there a way to purge these unused setups to clean up the file?
Reg360 Purge removed Setups
-
- I have made 10-20 posts
- Posts: 17
- Joined: Sat Jul 24, 2021 8:36 pm
- 2
- Full Name: Devon Biermann Bosch
- Company Details: Fortress Geomatics
- Company Position Title: Geospatial Specialist
- Country: Canada
- Linkedin Profile: Yes
- Has thanked: 1 time
- Been thanked: 1 time
-
- V.I.P Member
- Posts: 916
- Joined: Tue May 11, 2021 5:36 pm
- 2
- Full Name: Adam Berta
- Company Details: InnoScan 3D Hungary Kft
- Company Position Title: unknown
- Country: Hungary
- Linkedin Profile: No
- Has thanked: 51 times
- Been thanked: 297 times
- Contact:
Re: Reg360 Purge removed Setups
Did you have any version? If you did you need to remove the versions as well.
-
- I have made 10-20 posts
- Posts: 17
- Joined: Sat Jul 24, 2021 8:36 pm
- 2
- Full Name: Devon Biermann Bosch
- Company Details: Fortress Geomatics
- Company Position Title: Geospatial Specialist
- Country: Canada
- Linkedin Profile: Yes
- Has thanked: 1 time
- Been thanked: 1 time
Re: Reg360 Purge removed Setups
4 versions.the first 3 are 2000 setups. The 4th contains only 400.
I have a back up archive on file so I will remove the old 3 versions and see if that clears it.
I have a back up archive on file so I will remove the old 3 versions and see if that clears it.
-
- V.I.P Member
- Posts: 916
- Joined: Tue May 11, 2021 5:36 pm
- 2
- Full Name: Adam Berta
- Company Details: InnoScan 3D Hungary Kft
- Company Position Title: unknown
- Country: Hungary
- Linkedin Profile: No
- Has thanked: 51 times
- Been thanked: 297 times
- Contact:
Re: Reg360 Purge removed Setups
That is the intended way. Until there is a reference to a setup the files won't be deleted just from the database. If all of the reference to a file is deleted then it will be purged from the directory as well.Devon>biermannBosch wrote: ↑Sun Jun 04, 2023 2:52 pm 4 versions.the first 3 are 2000 setups. The 4th contains only 400.
I have a back up archive on file so I will remove the old 3 versions and see if that clears it.
I wouldn't create archive file then delete it, but it is your decesion. I'd just use the versions instead.
-
- I have made 10-20 posts
- Posts: 17
- Joined: Sat Jul 24, 2021 8:36 pm
- 2
- Full Name: Devon Biermann Bosch
- Company Details: Fortress Geomatics
- Company Position Title: Geospatial Specialist
- Country: Canada
- Linkedin Profile: Yes
- Has thanked: 1 time
- Been thanked: 1 time
Re: Reg360 Purge removed Setups
When I remove the versions it blows the entire project apart. (This has been happening since version 2021.0.0. So that's why i made the backup. (Leica might be the reason I have trust issues.)
Errors that appears once the versions are gone and i try to finalize. What is left in the sitemap. (Pointcloud is gone.) The file is now 400gb which is correct. Reg360 just doesn't know what to do now that the other versions aren't there holding it all together.
Errors that appears once the versions are gone and i try to finalize. What is left in the sitemap. (Pointcloud is gone.) The file is now 400gb which is correct. Reg360 just doesn't know what to do now that the other versions aren't there holding it all together.
You do not have the required permissions to view the files attached to this post.
-
- I have made 10-20 posts
- Posts: 17
- Joined: Sat Jul 24, 2021 8:36 pm
- 2
- Full Name: Devon Biermann Bosch
- Company Details: Fortress Geomatics
- Company Position Title: Geospatial Specialist
- Country: Canada
- Linkedin Profile: Yes
- Has thanked: 1 time
- Been thanked: 1 time
Re: Reg360 Purge removed Setups
I think I figured it out. You can only have 1 version when you delete scans. Once you've made a version, your SOL. They will stay in the original version. And once you remove that original version, it takes all pointcloud data with it. ( but leaves you pointless meta data)
-
- V.I.P Member
- Posts: 916
- Joined: Tue May 11, 2021 5:36 pm
- 2
- Full Name: Adam Berta
- Company Details: InnoScan 3D Hungary Kft
- Company Position Title: unknown
- Country: Hungary
- Linkedin Profile: No
- Has thanked: 51 times
- Been thanked: 297 times
- Contact:
Re: Reg360 Purge removed Setups
Well that is another reason to stay away from later releases than 2020.1 that was working correctly back then. I reported this issue on a prerelease version, but i was naive enough that i thought it will be fixed till release.