i m having trouble copying the coordinate system from one project to another in cyclone 9.4. i have the exterior of a building i need to copy the coordinate system from so it will line up with the interior when i send the data off to get modeled separately. i have heard of a way of exporting the coordinate system from one and importing it into another but i can remember how. i think it had something to do with a .txt file.
i need the coordinate system from church 1 copied and imported to church in
using the same coordinate system
-
- I have made <0 posts
- Posts: 1
- Joined: Tue Jul 02, 2019 2:02 pm
- 4
- Full Name: Aaron Jensen
- Company Details: LDI
- Company Position Title: 3D Scanning Specialist
- Country: USA
- Linkedin Profile: No
using the same coordinate system
You do not have the required permissions to view the files attached to this post.
-
- I have made 10-20 posts
- Posts: 19
- Joined: Thu Aug 06, 2015 12:00 pm
- 8
- Full Name: Fresh
- Company Details: AFC
- Company Position Title: Land-Engineering Surveyor
- Country: UK
- Linkedin Profile: Yes
Re: using the same coordinate system
It depends how the site survey has been carried out in order to make the registration.
But if you mean that you have your site control currently in church 1 and you have surveyed some of that control in the scans in "church in" you can select the vertex in your control controlspace in "church 1" - file - export as .txt , define the columns to Point ID - E - N -EL when prompted and import this file directly in "church in". It Will be a scanworld that you can use for the registration then.
But if you mean that you have your site control currently in church 1 and you have surveyed some of that control in the scans in "church in" you can select the vertex in your control controlspace in "church 1" - file - export as .txt , define the columns to Point ID - E - N -EL when prompted and import this file directly in "church in". It Will be a scanworld that you can use for the registration then.