Register 360 v 2021 - Apply controls

Discuss all Leica Cyclone, Cyclone REGISTER 360 & Cyclone FIELD 360 software here.
badam
V.I.P Member
V.I.P Member
Posts: 916
Joined: Tue May 11, 2021 5:36 pm
2
Full Name: Adam Berta
Company Details: InnoScan 3D Hungary Kft
Company Position Title: unknown
Country: Hungary
Linkedin Profile: No
Has thanked: 51 times
Been thanked: 297 times
Contact:

Re: Register 360 v 2021 - Apply controls

Post by badam »

unfortinatelly I cannot find the 2021.0 release note on the official site. The first paragraph says that this is a release which does not create project backward compatible... I don't think that they reverted those changes by 2021.1... But it should be noted there as well i think. Because the 2020.0 is lived like 1 month...

But i uploaded as attachment

Sometimes i feel that we are alfa testers for 5 grand plus CCP...
Leica Cyclone REGISTER 360 2020.1 REL 15072020.pdf
UI: just the file name contain 2020.1 but it is really 2021.0 i think this come out of leica hands straightly i didn't rename it...
You do not have the required permissions to view the files attached to this post.
User avatar
gsisman
V.I.P Member
V.I.P Member
Posts: 898
Joined: Fri Oct 07, 2016 1:51 pm
7
Full Name: Steve Long
Company Details: Montgomery County DOT _ MD
Company Position Title: Land Survey Supervisor
Country: United States
Skype Name: gsisman1
Linkedin Profile: Yes
Has thanked: 767 times
Been thanked: 148 times

Re: Register 360 v 2021 - Apply controls

Post by gsisman »

badam wrote: Thu May 13, 2021 7:19 pm unfortinatelly I cannot find the 2021.0 release note on the official site. The first paragraph says that this is a release which does not create project backward compatible... I don't think that they reverted those changes by 2021.1... But it should be noted there as well i think. Because the 2020.0 is lived like 1 month...

But i uploaded as attachment

Sometimes i feel that we are alfa testers for 5 grand plus CCP...

Leica Cyclone REGISTER 360 2020.1 REL 15072020.pdf

UI: just the file name contain 2020.1 but it is really 2021.0 i think this come out of leica hands straightly i didn't rename it...
Adam,

We had problem with our BLK360 and applying control also in v2021.1.
You are right that the release notes are mis-labeled with the sub version number-common Leica Scenario
We have two licenses of REg 360 . One Workstation is running v2021.1 and one 2021.0 . I had imported the job into v2021.1 and when applied control had the issue with the random assigning to scan station far away from the target. My civil designer in the office was still able to reconnect to the V2021.1 from his v2021.0- so I think any versions sub-version in 2021 are compatible. He was able to get a regular application of control (every station that had targets labeled linked to the scan target control. And when I opened it again (reconnected ) from v2021.1 I was able to see all the applied Ctrl links- go figure...I hope they put out another subversion patch that fixes that....soon v2021.2 ??
daniel.jansson
I have made 30-40 posts
I have made 30-40 posts
Posts: 36
Joined: Thu Dec 20, 2018 5:19 pm
5
Full Name: Daniel Jansson
Company Details: Teodoliten Mätteknik AB
Company Position Title: Reality Capture Consultant
Country: Sweden
Linkedin Profile: Yes
Has thanked: 7 times
Been thanked: 6 times

Re: Register 360 v 2021 - Apply controls

Post by daniel.jansson »

One easier fix that we have started using instead of downgrading or switching between versions is to duplicate all your control as many times as you need. So for example you have:
T001_1
T001_2
T001_3
….

All of them have the same coordinates but unique names. Then each setup can have its own control label and still use the same target. It also works with the automatic naming, so R360 will pick new names when the others are occupied.
User avatar
topogeo
V.I.P Member
V.I.P Member
Posts: 144
Joined: Fri May 02, 2014 1:38 pm
9
Full Name: piercarlo roasio
Company Details: studio roasio
Company Position Title: titolare
Country: italy
Linkedin Profile: No
Has thanked: 24 times
Been thanked: 25 times

Re: Register 360 v 2021 - Apply controls

Post by topogeo »

gsisman wrote: Sat May 15, 2021 4:52 am
We had problem with our BLK360 and applying control also in v2021.1.
You are right that the release notes are mis-labeled with the sub version number-common Leica Scenario
We have two licenses of REg 360 . One Workstation is running v2021.1 and one 2021.0 . I had imported the job into v2021.1 and when applied control had the issue with the random assigning to scan station far away from the target. My civil designer in the office was still able to reconnect to the V2021.1 from his v2021.0- so I think any versions sub-version in 2021 are compatible. He was able to get a regular application of control (every station that had targets labeled linked to the scan target control. And when I opened it again (reconnected ) from v2021.1 I was able to see all the applied Ctrl links- go figure...I hope they put out another subversion patch that fixes that....soon v2021.2 ??
Thanks for the solution .. but it doesn't work for me :-(
I tried with 2021.0 but the targets are recognized ONLY ONCE ..
Maybe it depends on some windows 10 setting / dll

Piercarlo
User avatar
topogeo
V.I.P Member
V.I.P Member
Posts: 144
Joined: Fri May 02, 2014 1:38 pm
9
Full Name: piercarlo roasio
Company Details: studio roasio
Company Position Title: titolare
Country: italy
Linkedin Profile: No
Has thanked: 24 times
Been thanked: 25 times

Re: Register 360 v 2021 - Apply controls

Post by topogeo »

daniel.jansson wrote: Mon May 17, 2021 10:02 am One easier fix that we have started using instead of downgrading or switching between versions is to duplicate all your control as many times as you need. So for example you have:
T001_1
T001_2
T001_3
….

All of them have the same coordinates but unique names. Then each setup can have its own control label and still use the same target. It also works with the automatic naming, so R360 will pick new names when the others are occupied.

it works ! :D

Thanks Daniel
This LSF community is really great :D :D :D

Piercarlo

PS Leica is expected to release the new version of Register360 by the end of the month.
User avatar
gsisman
V.I.P Member
V.I.P Member
Posts: 898
Joined: Fri Oct 07, 2016 1:51 pm
7
Full Name: Steve Long
Company Details: Montgomery County DOT _ MD
Company Position Title: Land Survey Supervisor
Country: United States
Skype Name: gsisman1
Linkedin Profile: Yes
Has thanked: 767 times
Been thanked: 148 times

Re: Register 360 v 2021 - Apply controls

Post by gsisman »

topogeo wrote: Wed May 19, 2021 9:53 am

it works ! :D

Thanks Daniel
This LSF community is really great :D :D :D

Piercarlo

PS Leica is expected to release the new version of Register360 by the end of the month.
Piercarlo

You mean the actual version.....not the final beta.....The first release of software is always the final beta...Not sure how they could have missed that in the beta, except they don't have a very good beta testing group...
BTW there is another thread on this same topic https://www.laserscanningforum.com/foru ... 88&t=17718
Post Reply

Return to “Leica Cyclone, Cyclone REGISTER 360 & Cyclone FIELD 360”