Register 360 ver 1.5.1 Exports only 28 of 44 setups

Discuss all Leica Cyclone, Cyclone REGISTER 360 & Cyclone FIELD 360 software here.
Post Reply
paulfisk
I have made <0 posts
I have made <0 posts
Posts: 7
Joined: Fri Mar 08, 2019 9:59 pm
5
Full Name: Paul
Company Details: BlackWolf Technologies
Company Position Title: CTO
Country: CA
Linkedin Profile: No

Register 360 ver 1.5.1 Exports only 28 of 44 setups

Post by paulfisk »

Been using Register 360 for a couple of months now.
Mostly things are pretty straightforward.
Most recent project had 44 setups and all are registered together.
When I go to publish the model, it crunches away for a while and produces the E57 I expected.
No errors or messages.
When I open the E57 in CloudCompare, only 28 of the 44 setups are there.

The model is of 2 floors of a building.
28 Scans on lower floor
the rest on the upper floor

There is one link that ties the top floor and the bottom floor and the link stats are not perfect but the model registers nicely.

The Resulting E57 only has the scans from the bottom floor.

Any idea about how to go about troubleshooting this issue?

Paul
User avatar
pburrows145
V.I.P Member
V.I.P Member
Posts: 2152
Joined: Wed Sep 12, 2007 9:16 am
16
Full Name: Paul Burrows
Company Details: Leica Geosystems Europe
Company Position Title: Scanning Solutions Manager - Europe
Country: UK
Linkedin Profile: Yes
Location: UK
Has thanked: 109 times
Been thanked: 123 times

Re: Register 360 ver 1.5.1 Exports only 28 of 44 setups

Post by pburrows145 »

Have you tried going out in another format (PTS?PTX/PTG etc) most of which are supported by CloudCompare.

I have not run into the issue of missing E57's from REG360.

Have you tried exporting as one (combined) E57 instead (or do you need the scan locations?)
Post Reply

Return to “Leica Cyclone, Cyclone REGISTER 360 & Cyclone FIELD 360”