Hi Everyone,
Kohera3D has recently added a new meshing module to it's scan viewer.
Signup/Download link:
http://www.kohera3d.com/kohera3d-mesh/
Tutorials page:
http://www.kohera3d.com/software-tutorials/
The Kohera3D Mesh module is new. We are interested in hearing all feedback good and bad, suggestions, etc.
Thank you,
Jon @ Summit Engineering and Design, LLC
www.sead.com
www.kohera3d.com
New Kohera3D Mesh
- JShubin
- I have made 30-40 posts
- Posts: 33
- Joined: Sat Apr 28, 2018 4:29 am
- 5
- Full Name: JShubin
- Company Details: Kohera3D
- Company Position Title: Laser Scanning Specialist
- Country: USA
- Has thanked: 17 times
- Been thanked: 13 times
- Contact:
New Kohera3D Mesh
You do not have the required permissions to view the files attached to this post.
Kohera3D - Laser Scanning Solutions
Website https://www.kohera3d.com
Contact [email protected]
Point Cloud to Mesh - Point Cloud to Piping - Point Cloud Segmentation
Website https://www.kohera3d.com
Contact [email protected]
Point Cloud to Mesh - Point Cloud to Piping - Point Cloud Segmentation
- Mike Annear
- V.I.P Member
- Posts: 800
- Joined: Mon Jun 08, 2009 5:45 am
- 14
- Full Name: Mike Annear
- Company Details: The Yard Brisbane
- Company Position Title: Manager - 3D Design and Scanning
- Country: Australia
- Linkedin Profile: Yes
- Location: Hemmant, Queensland, Australia
- Has thanked: 122 times
- Been thanked: 196 times
- Contact:
Re: New Kohera3D Mesh
Hi Jon,
I have downloaded your software, mainly because I am interested in your Piping capability for an ongoing job that I am working on.
BTW, I found this video on your webpage...
http://www.kohera3d.com/how-to-view-cyc ... nstraints/
What a great bit of software !
I am very comfortable with using constraints in Cyclone, but this would be invaluable for someone who is still trying to get their head around registration issues.
Regards,
Mike.
I have downloaded your software, mainly because I am interested in your Piping capability for an ongoing job that I am working on.
BTW, I found this video on your webpage...
http://www.kohera3d.com/how-to-view-cyc ... nstraints/
What a great bit of software !
I am very comfortable with using constraints in Cyclone, but this would be invaluable for someone who is still trying to get their head around registration issues.
Regards,
Mike.
- JShubin
- I have made 30-40 posts
- Posts: 33
- Joined: Sat Apr 28, 2018 4:29 am
- 5
- Full Name: JShubin
- Company Details: Kohera3D
- Company Position Title: Laser Scanning Specialist
- Country: USA
- Has thanked: 17 times
- Been thanked: 13 times
- Contact:
Re: New Kohera3D Mesh
Mike, thank you!
It's been invaluable to us when working with a large number of scans. We do our alignments in Scene, then tighten the registrations in Cyclone. Occasionally, we have a missing constraint somewhere and this certainly helps find where it is.
If you have any feedback to provide on our piping module or need any one on one assistance I can help. I've now turned on reply notifications.
Thanks again,
Jon
It's been invaluable to us when working with a large number of scans. We do our alignments in Scene, then tighten the registrations in Cyclone. Occasionally, we have a missing constraint somewhere and this certainly helps find where it is.
If you have any feedback to provide on our piping module or need any one on one assistance I can help. I've now turned on reply notifications.
Thanks again,
Jon
Kohera3D - Laser Scanning Solutions
Website https://www.kohera3d.com
Contact [email protected]
Point Cloud to Mesh - Point Cloud to Piping - Point Cloud Segmentation
Website https://www.kohera3d.com
Contact [email protected]
Point Cloud to Mesh - Point Cloud to Piping - Point Cloud Segmentation