Trimble Scanning Failure!

Discuss Trimble hardware here.
Post Reply
Rahul Reghu
I have made <0 posts
I have made <0 posts
Posts: 1
Joined: Wed Jun 19, 2019 2:20 pm
2
Full Name: Rahul Reghu
Company Details: Conserve Green Building and MEP Solution
Company Position Title: Surveyor
Country: Qatar
Skype Name: live:39a9503db167ae64
Linkedin Profile: Yes

Trimble Scanning Failure!

Post by Rahul Reghu »

Hi All,

We have a Trimble TX-8 Laser scanner from 2019 itself and used the instrument for different projects in the AEC industry.
Since the purchase there was a slight problem that first scans everyday didn’t get well like the scanner stops measuring at 80%.
Then it slowly changed to the whole scan getting affected. Now even after doing 15+ scans it's still not scanning properly.

I have checked with the diagnosis of the last scan from the maintenance option, and see 3 options failing (Measurement consistency always fails at first).

Vertical motor
Zero detected OK
Initialized OK
Motor movement OK
Motor consistency OK
Measurement via FPGA FAIL
Measurement consistency FAIL
Linearity activated YES
Linearity consistency FAIL
Speed lock off at start OK
Speed lock OK
Speed consistency OK
Time to lock 4.5
Ioannis
V.I.P Member
V.I.P Member
Posts: 434
Joined: Sun Jul 24, 2016 6:19 am
5
Full Name: Ioannis Papas
Company Details: techical office
Company Position Title: CEO
Country: EU
Skype Name: -
Linkedin Profile: Yes
Has thanked: 63 times
Been thanked: 29 times

Re: Trimble Scanning Failure!

Post by Ioannis »

Probably need calibration and service!be prepared to spend some money there 5000-6000 euro.
Post Reply

Return to “Trimble”