Hello,
I would like to use spherical / panoramic images (samyang 8mm) to color my cloud of points in Cyclone 9.2
I perform the procedure as per video (https://www.youtube.com/watch?v=i_nLNPYXK1k)
youtu.be/i_nLNPYXK1k, but the spherical image is not perfectly aligned (I think the height of the panoramic head is different from that of the scanner) ..
is it possible to choose points in common between the spherical photo and the point cloud (chek this video), or is the whole process automatic?
thank you
Problem with pano image on Cyclone
-
- I have made 10-20 posts
- Posts: 17
- Joined: Sun Jun 14, 2015 5:07 pm
- 8
- Full Name: Vito Muscio
- Company Details: Geological consulting
- Company Position Title: Geologist
- Country: Italy
- Linkedin Profile: Yes
-
- V.I.P Member
- Posts: 904
- Joined: Fri Apr 20, 2012 1:49 pm
- 11
- Full Name: Thad Wester
- Company Details: Clarity Scanning
- Company Position Title: President
- Country: USA
- Linkedin Profile: Yes
- Location: SC
- Has thanked: 1 time
- Been thanked: 2 times
Re: Problem with pano image on Cyclone
If there is a difference in height (the nodal point of the camera and scanner), the matching will never be perfect.
-
- I have made 10-20 posts
- Posts: 17
- Joined: Sun Jun 14, 2015 5:07 pm
- 8
- Full Name: Vito Muscio
- Company Details: Geological consulting
- Company Position Title: Geologist
- Country: Italy
- Linkedin Profile: Yes
Re: Problem with pano image on Cyclone
thanks a lot..
and is possible to pick the same point for the perfect allignemet?
if possible to map a pano image in manual mode?
thanks
and is possible to pick the same point for the perfect allignemet?
if possible to map a pano image in manual mode?
thanks