Hi Everybody,
Not sure if this has been asked before or not, but does any body have any information to allow me to measure the height of a faro focus from a survey station?
Thanks in advance.
Regards Kyle
Faro Focus, how to measure point
-
- I have made 80-90 posts
- Posts: 82
- Joined: Wed Jan 23, 2013 5:15 pm
- 11
- Full Name: Patrick
- Company Details: 360G
- Company Position Title: Director
- Country: uk
- Has thanked: 10 times
- Been thanked: 14 times
Re: Faro Focus, how to measure point
Hi Kyle,
If you are using a survey tripod and the correct tribrach adapter then the height will be the same as a leica instrument/prism.
P
If you are using a survey tripod and the correct tribrach adapter then the height will be the same as a leica instrument/prism.
P
- Dave Andrews
- V.I.P Member
- Posts: 172
- Joined: Thu Oct 18, 2012 8:58 pm
- 11
- Full Name: Dave Andrews
- Company Details: R.E. Warner Associates Inc.
- Company Position Title: 3d Scanning Coordinator
- Country: USA
- Linkedin Profile: Yes
- Location: Canton, Ohio
- Has thanked: 2 times
- Been thanked: 22 times
- Contact:
Re: Faro Focus, how to measure point
I cannot find the document at the moment, however Faro does have a document showing the dimensions.
"The harder you work, the harder it is to surrender."
Woody Hayes
Woody Hayes
- jcoco3
- Global Moderator
- Posts: 1724
- Joined: Sun Mar 04, 2012 5:43 pm
- 12
- Full Name: Jonathan Coco
- Company Details: Consultant
- Company Position Title: Owner
- Country: USA
- Linkedin Profile: No
- Has thanked: 70 times
- Been thanked: 157 times
Re: Faro Focus, how to measure point
The dimension you are looking for:
135.5mm from the base to the center of the mirror...finally got it memorized.
135.5mm from the base to the center of the mirror...finally got it memorized.
- Brett
- Forum Supporter
- Posts: 110
- Joined: Tue Oct 04, 2011 2:57 pm
- 12
- Full Name: Brett D
- Company Details: Omega Geomatics
- Company Position Title: Director
- Country: England
Re: Faro Focus, how to measure point
I bought one of these for a project last year. It worked really well with the 200mm spheres too.
http://shop.laserscanning-europe.com/Coaxial-Bracket
You just need to make sure your tribrach is level
http://shop.laserscanning-europe.com/Coaxial-Bracket
You just need to make sure your tribrach is level
Sent from my Sinclair ZX Spectrum+ using tapatalk