We recently ran into an issue when scanning and using our new Istar. The time was slightly off, just enough that the pictures appeared to happen just before the scans did. The pluggin that scene uses to colorize using Istar images uses the file names which come from the time stamps to figure out which scan that picture goes with. After talking with the support staff at NCTech, there was not a .exe to run that would be able to correct this, but my co-worker was able to whip one up real quick. Here is it for anyone that may need it. It will only change the time and not the date. Hope this can help someone else that also didn't read the directions.
https://drive.google.com/open?id=0B_51Y ... FJidnBCWjQ
Istar time sync issue
-
- I have made 30-40 posts
- Posts: 30
- Joined: Tue Nov 29, 2011 3:30 pm
- 12
- Full Name: Andrew Baddeley
- Company Details: Terra Visus Ltd
- Company Position Title: Chief Operating Officer
- Country: Scotland
- Skype Name: badders
- Linkedin Profile: Yes
- Location: Edinburgh
- Contact:
- Jason Warren
- Administrator
- Posts: 4224
- Joined: Thu Aug 16, 2007 9:21 am
- 16
- Full Name: Jason Warren
- Company Details: Laser Scanning Forum Ltd
- Company Position Title: Co-Founder
- Country: UK
- Skype Name: jason_warren
- Linkedin Profile: No
- Location: Retford, UK
- Has thanked: 443 times
- Been thanked: 246 times
- Contact:
Re: Istar time sync issue
brian715 wrote: ↑Tue Oct 10, 2017 9:22 pm We recently ran into an issue when scanning and using our new Istar. The time was slightly off, just enough that the pictures appeared to happen just before the scans did. The pluggin that scene uses to colorize using Istar images uses the file names which come from the time stamps to figure out which scan that picture goes with. After talking with the support staff at NCTech, there was not a .exe to run that would be able to correct this, but my co-worker was able to whip one up real quick. Here is it for anyone that may need it. It will only change the time and not the date. Hope this can help someone else that also didn't read the directions.
https://drive.google.com/open?id=0B_51Y ... FJidnBCWjQ
Thats great Brian, thank you for sharing...
Jason Warren
Co_Founder
Dedicated to 3D Laser Scanning
LaserScanningForum
Co_Founder
Dedicated to 3D Laser Scanning
LaserScanningForum