ZFLC_Point_Cloud_Colorization

Discuss Z+F Laser Control software here.
Post Reply
User avatar
studioMT
I have made 10-20 posts
I have made 10-20 posts
Posts: 19
Joined: Sat Feb 28, 2015 4:49 pm
9
Full Name: Matteo Tartaglini
Company Details: Studio Tecnico MT
Company Position Title: Senior Surveyor
Country: ITALY
Skype Name: geom.tartaglini
Linkedin Profile: Yes
Contact:

ZFLC_Point_Cloud_Colorization

Post by studioMT »

Hello to everybody...
i'm processing a caves project and have some problem with point cloud colorization.
I used external camera with Nodal Ninja and FishEye as lens.

*30 scans only 10 automaticcaly colorized from Laser Control;
*Then i startedd with manual colorization...(means to pick same points on my 360°Panorama and my PointCloud;
*Unfortunately for some scans, it doens't work manual colorization;
*I picked also 14 points...but software after processing continue to give me error and write...not enough correspond points;

Did someone had experience or advice would be helpful for me???

thank you
Christoph Held
I have made 70-80 posts
I have made 70-80 posts
Posts: 70
Joined: Wed Sep 05, 2012 4:04 pm
11
Full Name: Christoph Held
Company Details: Zoller+Froehlich GmbH
Company Position Title: Z+F Team
Country: Germany
Been thanked: 7 times

Re: ZFLC_Point_Cloud_Colorization

Post by Christoph Held »

Hi Matteo,

it sound a little like the points were not picked ideally. However, please contact [email protected] or directly myself (c.held@), so we can have a closer look what the issue is and solve it.

Best regards,
Chris
User avatar
studioMT
I have made 10-20 posts
I have made 10-20 posts
Posts: 19
Joined: Sat Feb 28, 2015 4:49 pm
9
Full Name: Matteo Tartaglini
Company Details: Studio Tecnico MT
Company Position Title: Senior Surveyor
Country: ITALY
Skype Name: geom.tartaglini
Linkedin Profile: Yes
Contact:

Re: ZFLC_Point_Cloud_Colorization

Post by studioMT »

Thank you Christoph,

I'll write you.

regards

MT
Post Reply

Return to “Z+F Laser Control”