I'm having an issue lining up the exported revit pipe model and the remainder cloud. I can import the remainder cloud but it puts it to the side of the piping model. Is there a way to line these up other than visually moving the point cloud over top of the pipe model?
Thanks in advance.
Ben
How to line up the remainder cloud with the exported Pipe model
-
- I have made 10-20 posts
- Posts: 12
- Joined: Mon May 14, 2018 5:56 pm
- 5
- Full Name: Benjamin Zilliox
- Company Details: KLH Engineers
- Company Position Title: CxA
- Country: United States
- Skype Name: Ben Zilliox
- Linkedin Profile: Yes
- Has thanked: 1 time
- Been thanked: 1 time
- Peyman Bashiri
- V.I.P Member
- Posts: 427
- Joined: Sun Dec 13, 2009 6:32 pm
- 14
- Full Name: Peyman Bashiri
- Company Details: Aero Geometrics Canadian Z+F reseller
- Company Position Title: Laser scanning and BIM Specialist
- Country: Canada
- Skype Name: pbashiri2003
- Linkedin Profile: Yes
- Location: Vancouver,BC
- Has thanked: 56 times
- Been thanked: 40 times
- Contact:
Re: How to line up the remainder cloud with the exported Pipe model
How do you import the recap point cloud? usually "Origin to Origin" is the best if you have several point clouds to import.
If in your original drawing the point was imported as Center to center, it would be next to impossible to align it with the new point cloud.
Peyman
If in your original drawing the point was imported as Center to center, it would be next to impossible to align it with the new point cloud.
Peyman
-
- I have made <0 posts
- Posts: 7
- Joined: Wed Feb 28, 2018 10:48 pm
- 6
- Full Name: James Mosimann
- Company Details: ClearEdge3D
- Company Position Title: Regional Sales Manager
- Country: United States
- Skype Name: [email protected]
- Linkedin Profile: Yes
- Contact:
Re: How to line up the remainder cloud with the exported Pipe model
When you send either the Remainder Cloud from EdgeWise or a point cloud from Recap into Revit so the cloud will align with an EdgeWise model, you will want to bring in the file "by shared coordinates" rather than "origin to origin"
James
James
James Mosimann
ClearEdge3D
ClearEdge3D