Edgewise model into Revit

Discuss ClearEdge3D software here.
dcontrerasCE3D
I have made <0 posts
I have made <0 posts
Posts: 1
Joined: Tue Feb 21, 2017 8:41 pm
7
Full Name: Danielle Contreras
Company Details: ClearEdge 3D
Company Position Title: Applications Engineer
Country: USA
Linkedin Profile: No

Re: Edgewise model into Revit

Post by dcontrerasCE3D »

Hi Shiva,

If you contact us through [email protected], and send us your data; particularly you EdgeWise model, EdgeWise pointcloud (.c3BD file and DB folder), and the .c3rvt files. I would be happy to test it on our side and will be able to keep you updated with the situation!

Best,
Danielle

Shivakumar wrote:Hello Jason,

I have inserted point cloud "By Shared Coordinates" into Revit but point cloud is shifted a bit away from the model. please find the attached screenshot.

Thanks you
shiva.


jmoranCE3D wrote:Hey Shiva,

I suggest importing the point cloud "Auto - By Shared Coordinates" in to Revit rather than "Origin to Origin". In my experience with EdgeWise "By Shared Coordinates" achieves better results. Best of luck!
jamesworrell
V.I.P Member
V.I.P Member
Posts: 537
Joined: Mon Jun 16, 2014 1:45 pm
9
Full Name: James Worrell
Company Details: Bennett and Francis
Company Position Title: Director
Country: Australia
Linkedin Profile: Yes
Location: Brisbane, Queensland, Australia
Has thanked: 14 times
Been thanked: 87 times
Contact:

Re: Edgewise model into Revit

Post by jamesworrell »

Will put good money on it not being Edgewise .. Revit doesn't have enough precision for on the Point Cloud family (running in feet) and matching it to elements (metres) - so large coordinates have a small rounding error on the distance from origin - you will get small shifts and can calculate it quite easily.
Post Reply

Return to “ClearEdge3D”