The display issue has returned.
Is 2.7 ready to download?
I have tried the 2.6.3 BETA but have the same issue.
Thanks,
David
CloudCompare on Windoze 10
- ddustin
- V.I.P Member
- Posts: 956
- Joined: Mon Aug 22, 2011 9:28 pm
- 12
- Full Name: David Dustin
- Company Details: Federal Bureau of Investigations
- Company Position Title: Visualization Information Specialist
- Country: USA
- Linkedin Profile: Yes
- Location: Quantico, VA
- Has thanked: 1 time
- Been thanked: 11 times
- Contact:
- danielgm
- V.I.P Member
- Posts: 195
- Joined: Thu Jun 20, 2013 10:45 am
- 10
- Full Name: Daniel Girardeau-Montaut
- Company Details: CloudCompare
- Company Position Title: Administrator
- Country: France
- Linkedin Profile: Yes
- Location: Grenoble, France
- Has thanked: 11 times
- Been thanked: 34 times
- Contact:
Re: CloudCompare on Windoze 10
I'll PM you the very first package available. Hope it will fix the issue.
-
- V.I.P Member
- Posts: 958
- Joined: Sun Nov 01, 2009 11:18 pm
- 14
- Full Name: Dennis Hirota
- Company Details: Sam O Hirota Inc
- Company Position Title: President
- Country: USA
- Linkedin Profile: Yes
- Location: Hawaii, USA
- Has thanked: 87 times
- Been thanked: 379 times
Re: CloudCompare on Windoze 10
I am running CC2.8.1 and using Oculus Rift system and it works well, but slowly. I think the model size needs to be reduced. The original theater model scan is 265M points and reduced by 95% and meshed with texture applied resulting in about 10M faces as a PLY file.
I am trying to use my XBOX controller, but it says that "no device registered" in file>gamepad>enable. Should it work without Oculus?
I am trying to use my XBOX controller, but it says that "no device registered" in file>gamepad>enable. Should it work without Oculus?
-
- V.I.P Member
- Posts: 958
- Joined: Sun Nov 01, 2009 11:18 pm
- 14
- Full Name: Dennis Hirota
- Company Details: Sam O Hirota Inc
- Company Position Title: President
- Country: USA
- Linkedin Profile: Yes
- Location: Hawaii, USA
- Has thanked: 87 times
- Been thanked: 379 times
Re: CloudCompare on Windoze 10
Daniel
I just figured out the problem. The mesh and point clouds that I am trying to open are just too large so they seem not to move or are moving slowing so it is difficult to see them move. I opened a significantly smaller mesh and it was very easy to move the object with the 3D mouse, with and without the Oculus Rift.
I just figured out the problem. The mesh and point clouds that I am trying to open are just too large so they seem not to move or are moving slowing so it is difficult to see them move. I opened a significantly smaller mesh and it was very easy to move the object with the 3D mouse, with and without the Oculus Rift.