Is it possible to import raw Kreon laser data into any package other than the big guys like Geomagic, Polyworks etc?
I want to use Rhino Mesh to surf (am open to other ideas) to generate surfaces, but am looking for a more affordable route than above options.
Obviously, being able to convert the point cloud & optimise the mesh accurately is important.
Any suggestions would be welcome please
Kreon Solano data to mesh
-
- I have made <0 posts
- Posts: 1
- Joined: Tue Dec 20, 2016 6:50 am
- 7
- Full Name: Jason
- Company Details: Wepener
- Company Position Title: Owner
- Country: RSA
- Linkedin Profile: Yes
-
- V.I.P Member
- Posts: 643
- Joined: Mon Aug 11, 2008 4:13 pm
- 15
- Full Name: James Rye
- Company Details: Merrett Survey Partnership
- Company Position Title: Spatial Analyst
- Has thanked: 28 times
- Been thanked: 69 times
Re: Kreon Solano data to mesh
Rhino is great, another alternative could be meshlab - which is open source.
- nickherath
- I have made 60-70 posts
- Posts: 63
- Joined: Sun Mar 30, 2008 6:22 am
- 16
- Full Name: Nick Herath
- Company Details: Veris
- Company Position Title: Principal
- Country: Australia
- Linkedin Profile: Yes
- Location: Melbourne, Australia
- Been thanked: 1 time
- Contact:
Re: Kreon Solano data to mesh
That's like buying a Ferrari and not being able to afford the fuel to drive it.
Good software is every bit as important as your hardware. Whilst being costly in the short term as an up-front cost, good software such as Polyworks and Geomagic which are designed to work with your hardware will save you countless hours in the long term and deliver superior results with less effort.
Good software is every bit as important as your hardware. Whilst being costly in the short term as an up-front cost, good software such as Polyworks and Geomagic which are designed to work with your hardware will save you countless hours in the long term and deliver superior results with less effort.
- arie
- I have made 40-50 posts
- Posts: 47
- Joined: Wed Jun 05, 2013 11:43 am
- 10
- Full Name: Arie Kai-Browne
- Company Details: University of Applied Sciences Berlin
- Company Position Title: Scientific staff member
- Country: Germany
- Skype Name: aaaarie
- Linkedin Profile: No
- Location: Berlin
- Been thanked: 11 times
Re: Kreon Solano data to mesh
Unfortunately, Meshlabs development has slowed down quite a bit (though a new version is in sight) and its viewport perfomance is quite laggy when working with high-res meshes. I hope the new version will adress that.
Alternatively, you can use Cloudcompare for meshing, the poisson surface reconstruction yields very good results as long as one sets the octree-depth accordingly. For further editing the mesh, you could use the free meshmixer, which has a wide array of different tools for manipulating meshes.
What do you want to achieve with the mesh?
Alternatively, you can use Cloudcompare for meshing, the poisson surface reconstruction yields very good results as long as one sets the octree-depth accordingly. For further editing the mesh, you could use the free meshmixer, which has a wide array of different tools for manipulating meshes.
What do you want to achieve with the mesh?