CloudCompare on Windoze 10

3DReshaper, FROST, MeshLab, VRMesh, ZBrush & 3DCoat, CloudCompare, Etc
User avatar
ddustin
V.I.P Member
V.I.P Member
Posts: 900
Joined: Mon Aug 22, 2011 9:28 pm
Full Name: David Dustin
Company Details: Dustin Forensics
Company Position Title: President
Country: USA
Linkedin Profile: Yes
Location: Georgia, USA.. Planet Earth
Contact:

Re: CloudCompare on Windoze 10

Post by ddustin » Wed Mar 09, 2016 2:38 am

The display issue has returned.
Is 2.7 ready to download?
I have tried the 2.6.3 BETA but have the same issue.

Thanks,
David

User avatar
danielgm
V.I.P Member
V.I.P Member
Posts: 140
Joined: Thu Jun 20, 2013 10:45 am
Full Name: Daniel Girardeau-Montaut
Company Details: CloudCompare
Company Position Title: Administrator
Country: France
Linkedin Profile: Yes
Location: Grenoble, France
Contact:

Re: CloudCompare on Windoze 10

Post by danielgm » Wed Mar 09, 2016 7:30 am

I'll PM you the very first package available. Hope it will fix the issue.
Daniel
CloudCompare admin
http://www.cloudcompare.org/

dhirota
V.I.P Member
V.I.P Member
Posts: 283
Joined: Mon Nov 02, 2009 12:18 am
Full Name: Dennis Hirota
Company Details: Sam O. Hirota Inc.
Company Position Title: President
Country: USA
Linkedin Profile: Yes
Location: Hawaii, USA

Re: CloudCompare on Windoze 10

Post by dhirota » Sun Mar 05, 2017 11:23 pm

I am running CC2.8.1 and using Oculus Rift system and it works well, but slowly. I think the model size needs to be reduced. The original theater model scan is 265M points and reduced by 95% and meshed with texture applied resulting in about 10M faces as a PLY file.

I am trying to use my XBOX controller, but it says that "no device registered" in file>gamepad>enable. Should it work without Oculus?
Dennis Hirota, PhD, PE, LPLS
dennishirota@gmail.com

dhirota
V.I.P Member
V.I.P Member
Posts: 283
Joined: Mon Nov 02, 2009 12:18 am
Full Name: Dennis Hirota
Company Details: Sam O. Hirota Inc.
Company Position Title: President
Country: USA
Linkedin Profile: Yes
Location: Hawaii, USA

Re: CloudCompare on Windoze 10

Post by dhirota » Tue Mar 07, 2017 2:10 am

Daniel

I just figured out the problem. The mesh and point clouds that I am trying to open are just too large so they seem not to move or are moving slowing so it is difficult to see them move. I opened a significantly smaller mesh and it was very easy to move the object with the 3D mouse, with and without the Oculus Rift.
Dennis Hirota, PhD, PE, LPLS
dennishirota@gmail.com

Post Reply

Return to “Meshing Software”

Who is online

Users browsing this forum: No registered users and 1 guest