Reduce mesh issue

Discuss Leica Cyclone 3DR software here.
Post Reply
npara
I have made 80-90 posts
I have made 80-90 posts
Posts: 87
Joined: Wed Oct 10, 2018 5:12 pm
5
Full Name: Scott Nelson
Company Details: Nelson Parametrics Inc
Company Position Title: Owner
Country: Canada
Linkedin Profile: Yes
Has thanked: 1 time
Been thanked: 3 times

Reduce mesh issue

Post by npara »

Hi,

In 2020.1 when reducing a mesh, the output box can't be activated? I feel like I'm missing a step? Any ideas?

Thanks,
User avatar
GCFdesign
V.I.P Member
V.I.P Member
Posts: 308
Joined: Wed Sep 04, 2019 7:23 am
4
Full Name: Gary Fellows
Company Details: GCF Design Limited
Company Position Title: Director
Country: United Kingdom
Linkedin Profile: Yes
Has thanked: 59 times
Been thanked: 31 times

Re: Reduce mesh issue

Post by GCFdesign »

2020.1? Which software specifically?
Regards,

Gary Fellows

Director

GCF Design Limited

https://gcfdesign.wixsite.com/gcfdesign
User avatar
landmeterbeuckx
V.I.P Member
V.I.P Member
Posts: 1615
Joined: Tue May 01, 2012 5:19 pm
11
Full Name: Lieven Beuckx
Company Details: Studiebureau Beuckx
Company Position Title: Owner
Country: Belgium
Linkedin Profile: Yes
Has thanked: 183 times
Been thanked: 548 times

Re: Reduce mesh issue

Post by landmeterbeuckx »

i'm guessing Faro Scene
LSBbvba
Surveying services - 3D Laserscanning
Tel : +32477753126
www.lsbbvba.be
[email protected]
sim.herrod
V.I.P Member
V.I.P Member
Posts: 352
Joined: Thu Jan 14, 2016 12:26 pm
8
Full Name: Simeon Herrod
Company Details: Terra Measurement Limited
Company Position Title: 3D Data Manager
Country: UK
Linkedin Profile: No
Has thanked: 73 times
Been thanked: 110 times

Re: Reduce mesh issue

Post by sim.herrod »

I'm going with 3DR.
User avatar
gilles_3DR
V.I.P Member
V.I.P Member
Posts: 235
Joined: Mon Dec 08, 2014 11:41 am
9
Full Name: Gilles Monnier
Company Details: Hexagon
Company Position Title: 3DR Technical Manager
Country: France
Linkedin Profile: Yes
Has thanked: 2 times
Been thanked: 28 times

Re: Reduce mesh issue

Post by gilles_3DR »

Hi,
So, in the previous versions of Cyclone 3DR, one could go for reducing a mesh and un-check the reduced mesh as an output.
In this case, he would not get anything from the command, which made no sense, and could lead to some questions of course!
As a result, for most of the commands, we identified which output was expected and we removed the possibility to un-check it!
I hope this is clear for everyone
npara
I have made 80-90 posts
I have made 80-90 posts
Posts: 87
Joined: Wed Oct 10, 2018 5:12 pm
5
Full Name: Scott Nelson
Company Details: Nelson Parametrics Inc
Company Position Title: Owner
Country: Canada
Linkedin Profile: Yes
Has thanked: 1 time
Been thanked: 3 times

Re: Reduce mesh issue

Post by npara »

Hi Gilles,

So does that mean it just reduces the input mesh? It just seems a little confusing, since the output mesh box is still there but you can't do anything with it. I personally liked when it would auto output a mesh called mesh_reduced or something like that!

Thanks,
npara
I have made 80-90 posts
I have made 80-90 posts
Posts: 87
Joined: Wed Oct 10, 2018 5:12 pm
5
Full Name: Scott Nelson
Company Details: Nelson Parametrics Inc
Company Position Title: Owner
Country: Canada
Linkedin Profile: Yes
Has thanked: 1 time
Been thanked: 3 times

Re: Reduce mesh issue

Post by npara »

Hi Gilles,

I'm still struggling with this command, I preview the reduction, click ok, the command processes - but never exits - the dialogue stays up, eventually I'm forced to cancel to leave the command, and the mesh is unaltered.
npara
I have made 80-90 posts
I have made 80-90 posts
Posts: 87
Joined: Wed Oct 10, 2018 5:12 pm
5
Full Name: Scott Nelson
Company Details: Nelson Parametrics Inc
Company Position Title: Owner
Country: Canada
Linkedin Profile: Yes
Has thanked: 1 time
Been thanked: 3 times

Re: Reduce mesh issue

Post by npara »

Hi, I think I figured it out - it is erroring out on some meshes and I don't notice the little box describing the error in the right corner of the screen. User error.
User avatar
gilles_3DR
V.I.P Member
V.I.P Member
Posts: 235
Joined: Mon Dec 08, 2014 11:41 am
9
Full Name: Gilles Monnier
Company Details: Hexagon
Company Position Title: 3DR Technical Manager
Country: France
Linkedin Profile: Yes
Has thanked: 2 times
Been thanked: 28 times

Re: Reduce mesh issue

Post by gilles_3DR »

ha! Thx Nelson! :)
npara
I have made 80-90 posts
I have made 80-90 posts
Posts: 87
Joined: Wed Oct 10, 2018 5:12 pm
5
Full Name: Scott Nelson
Company Details: Nelson Parametrics Inc
Company Position Title: Owner
Country: Canada
Linkedin Profile: Yes
Has thanked: 1 time
Been thanked: 3 times

Re: Reduce mesh issue

Post by npara »

Hi,

I'm finding that mesh I create via meshwizard scripts are proving very difficult to reduce. It almost always encounters an error when processing.
Post Reply

Return to “Leica Cyclone 3DR”