I 'm trying to compare point cloud with my reference( mesh).
I have choosen display resolution, fine. I have very dense point cloud ( >41 milion) but I get result with very sparse cloud. Why?
Now I tried to create annotation but all are grey. I change radius but no sucess.
I tried already with much higher radius (>1m). I get only 5-10% annotations. 90-95 % are grey. I ‘m totally aware of
http://support1.geomagic.com/link/porta ... tions-gray
I generally cann't get annotations for point have( - )deviation.
static display setting is 100 %.
Ponit to mesh compare
- IngSayyad
- V.I.P Member
- Posts: 239
- Joined: Thu Dec 19, 2013 12:10 pm
- 10
- Full Name: shahzad sayyad
- Company Details: Ingenieurbuero Drecoll
- Company Position Title: Entwicklungsingenieur
- Country: Germany
- Skype Name: shah.baba_2012
- Linkedin Profile: No
- Location: Hannover
- Been thanked: 1 time
- Contact:
Ponit to mesh compare
You do not have the required permissions to view the files attached to this post.
Dr.-Ing. Shahzad Sayyad
-
- V.I.P Member
- Posts: 353
- Joined: Thu Jan 23, 2014 10:07 am
- 10
- Full Name: Stefan Wachsmann
- Company Details: scantaxi.de
- Company Position Title: supervisor
- Country: Germany
- Linkedin Profile: No
- Location: Germany
- Been thanked: 1 time
- Contact:
Re: Ponit to mesh compare
did you turn of the display decimation?
Tab: Display -> General
field: "static display percentage" / "dynamic display percentage"
increase the first one, per default this will be only 5 or 10 with your 40Mio Points!
100% will heavily slow down your PC even if you have a huge graphics-card!
Kind regards
Stefan
Tab: Display -> General
field: "static display percentage" / "dynamic display percentage"
increase the first one, per default this will be only 5 or 10 with your 40Mio Points!
100% will heavily slow down your PC even if you have a huge graphics-card!
Kind regards
Stefan