I've seen others post similar issues, but havent really heard a solution.
I have two vehicles and a scan scene.
I need to place the vehicles, (which were scanned in separate locations from the scene scan) into the scene. everything was scanned using Leica scanners and the pointclouds /modelspaces are registered in Leica Cyclone with modules register and survey.
I need the ability to move the cars in the scene and get different measurements from a specific viewpoint.
After speaking with a Leica Rep, I've been told that I can simply copy and paste the car modelspaces into the scene pointcloud, but the issue becomes not having the ability to move it. This could be a user error or maybe Leica can't handle moving data that isn't a simple model?
I've tried using CloudCompare, but I cannot get the viewpoint that I need accurately from Cloudcompare.
Also, would Leica IMS360 help in anyway?
Placing vehicles into a Leica pointcloud
-
- I have made 10-20 posts
- Posts: 15
- Joined: Wed Nov 06, 2019 7:45 pm
- 4
- Full Name: Alison Wilkes
- Company Details: NYSP
- Company Position Title: Analyst
- Country: USA
- Linkedin Profile: No
-
- V.I.P Member
- Posts: 120
- Joined: Thu Jun 14, 2018 10:20 am
- 5
- Full Name: Brad
- Company Details: 3d scan
- Company Position Title: Guru
- Country: Canada
- Linkedin Profile: Yes
- Location: Van
- Been thanked: 5 times
Placing vehicles into a Leica pointcloud
Place the scene into Revit or Autocad and move the cars to match the scene?
No need for CloudCompare on this one
No need for CloudCompare on this one
-
- I have made 70-80 posts
- Posts: 71
- Joined: Fri Aug 24, 2018 6:15 pm
- 5
- Full Name: Ramon F Herrera
- Company Details: Free Open Source3D Model of Dealey Plaza
- Company Position Title: Founder - Chief Bottle Washer
- Country: US
- Linkedin Profile: Yes
- Location: Houston, Texas
- Has thanked: 8 times
- Contact:
Re: Placing vehicles into a Leica pointcloud
Please see my related post:Spwilka wrote: ↑Tue Dec 24, 2019 6:42 pm I've seen others post similar issues, but havent really heard a solution.
I have two vehicles and a scan scene.
I need to place the vehicles, (which were scanned in separate locations from the scene scan) into the scene. everything was scanned using Leica scanners and the pointclouds /modelspaces are registered in Leica Cyclone with modules register and survey.
I need the ability to move the cars in the scene and get different measurements from a specific viewpoint.
After speaking with a Leica Rep, I've been told that I can simply copy and paste the car modelspaces into the scene pointcloud, but the issue becomes not having the ability to move it. This could be a user error or maybe Leica can't handle moving data that isn't a simple model?
I've tried using CloudCompare, but I cannot get the viewpoint that I need accurately from Cloudcompare.
Also, would Leica IMS360 help in anyway?
https://www.laserscanningforum.com/foru ... 69&t=15645
I have some experience in the post-scanning tasks. See here:
http://www.dealey-plaza.org/your-design ... e_Limo.mp4
This is my recommendation, after much experimentation:
Point Cloud -> Revit -> 3ds Max
If you want to impress, you need to add V-ray rendering.
In Freelancer you get the best possible value.
-Ramon
JFK Numbers
[email protected]
Last edited by Raymond on Wed Dec 25, 2019 6:29 pm, edited 2 times in total.
-
- I have made 70-80 posts
- Posts: 71
- Joined: Fri Aug 24, 2018 6:15 pm
- 5
- Full Name: Ramon F Herrera
- Company Details: Free Open Source3D Model of Dealey Plaza
- Company Position Title: Founder - Chief Bottle Washer
- Country: US
- Linkedin Profile: Yes
- Location: Houston, Texas
- Has thanked: 8 times
- Contact:
Re: Placing vehicles into a Leica pointcloud
I don't have much experience with 3ds Max, but was able to add the two mailboxes and the Hertz Clock to the master scene:
-Ramon F Herrera
JFK Numbers
[email protected]
-Ramon F Herrera
JFK Numbers
[email protected]
You do not have the required permissions to view the files attached to this post.
- Phill
- V.I.P Member
- Posts: 653
- Joined: Wed Feb 06, 2008 7:19 am
- 16
- Full Name: Phillip Nixon
- Company Details: SKM
- Company Position Title: Surveyor
- Country: Australia
- Location: Sydney
- Has thanked: 7 times
- Been thanked: 45 times
Re: Placing vehicles into a Leica pointcloud
Alison
Your problem is cyclone licences. You need a model licence to move objects in cyclone.
Phill
Your problem is cyclone licences. You need a model licence to move objects in cyclone.
Phill
- gsisman
- V.I.P Member
- Posts: 898
- Joined: Fri Oct 07, 2016 1:51 pm
- 7
- Full Name: Steve Long
- Company Details: Montgomery County DOT _ MD
- Company Position Title: Land Survey Supervisor
- Country: United States
- Skype Name: gsisman1
- Linkedin Profile: Yes
- Has thanked: 767 times
- Been thanked: 148 times
Re: Placing vehicles into a Leica pointcloud
Yeah, those pesky add-on licenses to perform one task. Is it worth $8500 ?
- Phill
- V.I.P Member
- Posts: 653
- Joined: Wed Feb 06, 2008 7:19 am
- 16
- Full Name: Phillip Nixon
- Company Details: SKM
- Company Position Title: Surveyor
- Country: Australia
- Location: Sydney
- Has thanked: 7 times
- Been thanked: 45 times
Re: Placing vehicles into a Leica pointcloud
Haha, yeah.... I wonder if it would be more popular if it was a bit cheaper (like $8000 cheaper). Such a waste of a pretty good modelling program (in my opinion anyway, I'm sure others will chime in).